|
  Click To
Enlarge Photo |
DeWALT Heavy-Duty 6'' High Performance Cut-Off/Grinder |
|
The D28144N Features
- 13.0 Amp / 2.3HP, 9,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection
- No-Lock On paddle switch prevents the user from locking the grinder on
- Dual Clutch Protection prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing the durability
- Dust Ejection System provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents
- Quick-change wheel release provides tool free wheel removal
- Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion
- One piece brush arm prevents brush hang-up due to dust ingestion
- Complete Electronic Control provides multiple advanced technology features such as E-Clutch(TM), Power-Off(TM) and Power-Loss Reset(TM)
- E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor
- Power-Off Overload Protection shuts the tool off before it reaches overload or burn-up
- Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
- Vibration reducing two position side handle provides user comfort and reduces user felt vibration
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
- Keyless adjustable guard provides tool free guard adjustments increasing productivity
Specifications
- Amps 13.0 Amps
- Max Watts Out 1,700 W
- No Load Speed 9,000 rpm
- Use Wheels RPM Above 9,900 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 13 "
Includes
- 2-position side handle
- Type 27 depressed center wheel
- Type 27 keyless adjustable guard
- Type 1 cutting wheel
- Type 1 keyless adjustable guard
- wrench
• Shipping Weight: 6.50 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 4-1/2'' (115mm) Small Angle Grinder |
|
Features:
10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
Dust Ejection System(TM) provides durability by ejecting dust particles that enter the tool through the air intake vents
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
One piece brush arm prevents brush hang-up due to dust ingress
Quick-Change(TM) Wheel Release provides easier and quicker wheel removal without the need for a wrench
Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
Vibration reducing removable side handle provides user comfort and reduces user felt vibration
Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Oversized, protected spindle lock button provides easier and quicker wheel changes
Paddle switch lock-off provides the user protection from accidental start up
Matching wheel flanges allow the use of common accessories
Specifications:
Amps 10.0 Amps
Max Watts Out 1,200 W
No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes
Spindle Thread 5/8"-11
Tool Length 11-1/4"
Includes:
two position side handle
depressed center wheel
keyless adjustable guard
wrench.• Shipping Weight: 6.50 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 4-1/2'' (115mm) Small Angle Grinder Kit |
|
The D28402K Features:
10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
Dust Ejection System(TM) provides durability by ejecting dust particles that enter the tool through the air intake vents
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
One piece brush arm prevents brush hang-up due to dust ingress
Quick-Change(TM) Wheel Release provides easier and quicker wheel removal without the need for a wrench
Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
Vibration reducing removable side handle provides user comfort and reduces user felt vibration
Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Oversized, protected spindle lock button provides easier and quicker wheel changes
Paddle switch lock-off provides the user protection from accidental start up
Matching wheel flanges allow the use of common accessories
Specifications:
Amps 10.0 Amps
Max Watts Out 1,200 W
No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes
Spindle Thread 5/8"-11
Tool Length 11-1/4"
Includes:
two position side handle
depressed center wheel
keyless adjustable guard
wrench
heavy-duty kit box.• Shipping Weight: 10.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT 4-1/2'' Heavy-Duty Small Angle Grinder w/ No Lock-On |
|
The D28402N Features
- 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection.
- Dust Ejection System provides durability by ejecting dust particles that enter the tool through the air intake vents.
- Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces.
- One piece brush arm prevents brush hang-up due to dust ingress.
- Quick Change wheel release provides easier and quicker wheel removal without the need for a wrench.
- Keyless adjustable guard provides tool free guard adjustment thus increasing productivity.
- Vibration reducing removable side handle provides user comfort and reduces user felt vibration.
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage.
- Oversized, protected spindle lock button provides easier and quicker wheel changes.
- No Lock-On paddle switch lock-off provides the user protection from accidental start up.
- Matching wheel flanges allow the use of common accessories.
Specifications
- Amps 10.0 AC/DC Amps
- Max Watts Out 1,200 W
- No Load Speed 11,000 rpm
- Use Wheels RPM Above 12,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11-1/4"
Includes
- 2-position side handle
- depressed center wheel
- keyless adjustable guard
- wrench
• Shipping Weight: 12.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 4-1/2'' (115mm) Small Angle Grinder |
|
Features:
10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protection
Dust Ejection System(TM) provides durability by ejecting dust particles that enter the tool through the air intake vents
Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
One piece brush arm prevents brush hang-up due to dust ingress
Quick-Change(TM) Wheel Release provides easier and quicker wheel removal without the need for a wrench
Keyless adjustable guard provides tool free guard adjustment thus increasing productivity
Vibration reducing removable side handle provides user comfort and reduces user felt vibration
Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Oversized, protected spindle lock button provides easier and quicker wheel changes
Paddle switch lock-off provides the user protection from accidental start up
Matching wheel flanges allow the use of common accessories
Specifications:
Amps 10.0 Amps
Max Watts Out 1,200 W
No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock Yes
Spindle Thread 5/8"-11
Tool Length 11-1/4"
Includes:
two position side handle
depressed center wheel
keyless adjustable guard
wrench.
Factory service, factory perfect reconditioned tool.
Includes a full 1 year factory warranty.
• Shipping Weight: 6.50 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 7'' (180mm) Large Angle Grinder |
|
The D28474W Features:
• High power 4 HP (maximum motor HP) motor with overload protection
provides higher operating speeds under load.
• 8,000 rpm provides optimal material removal with 7'' grinding
wheels.
• Epoxy coated motor provides long service life against abrasion
from airborne debris.
• 2 wire double insulated 'S' jacket rubber cord provides increased
durability and life in hot and cold climates.
• Keyless adjustable guard allows for guard adjustments to be made
without tools.
• Low profile gearcase allows for work in tight areas.
• 5 position side handle provides improved ergonomics for specific
applications.
• Lightweight inceases productivity in extended use applications.
Specifications:
• Amps: 15 AC/DC
• Max Watts Out: 3,084 W
• No Load Speed: 8,000 rpm
• Use Wheels RPM Above: 8,500 rpm
• Spindle Lock: Yes
• Spindle Thread: 5/8''-11
Includes:
• 7'' guard
• Side handle
• 7'' grinding wheel
• Shipping Weight: 14.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 9'' (230mm) Large Angle Grinder (5,000 rpm) |
|
The D28493N Features:
• High power 4 HP motor with overload protection provides
higher operating speeds under load.
• Low 5,000 rpm speed is optimal for sanding discs and
specialty wheels.
• Epoxy coated motor provides long service life against
abrasion from airborne debris.
• 2 wire double insulated 'S' jacket rubber cord provides
increased durability and life in hot and cold climates.
• Keyless adjustable guard allows for guard adjustments to
be made without tools.
• Low profile gearcase allows for work in tight areas.
• 5 position side handle provides improved ergonomics for
specific applications.
• Light Weight inceases productivity in extended use applications.
Specifications:
• Amps: 15.0 AC/DC Amps
• Max Watts Out: 3,084 W
• No Load Speed: 5,000 rpm
• Use Wheels RPM Above: 5,500 rpm
• Spindle Lock: Yes
• Spindle Thread: 5/8''-11
Includes:
• 9'' guard
• Side handle
• Shipping Weight: 14.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 9'' (230mm) Large Angle Grinder (6,000 rpm) |
|
The D28494N Features:
• High power 4 HP motor with overload protection provides
higher operating speeds under load.
• 6,000 rpm provides optimal material removal with 9''
grinding wheels.
• Epoxy coated motor provides long service life against
abrasion from airborne debris.
• 2 wire double insulated 'S' jacket rubber cord provides
increased durability and life in hot and cold climates.
• Keyless adjustable guard allows for guard adjustments to
be made without tools.
• Low profile gearcase allows for work in tight areas.
• 5 position side handle provides improved ergonomics for
specific applications.
• Light Weight inceases productivity in extended use applications.
Specifications:
• Amps: 15.0 AC/DC Amps
• Max Watts Out: 3,084 W
• No Load Speed: 6,000 rpm
• Use Wheels RPM Above: 6,600 rpm
• Spindle Lock: Yes
• Spindle Thread: 5/8''-11
Includes:
• 9'' guard
• Side handle.
• Shipping Weight: 14.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 7'' (180mm) Large Angle Grinder |
|
The D28494S Features:
• High power 4 HP motor with overload protection provides
higher operating speeds under load.
• 6,000 rpm speed is designed for versatility in a variety
of applications.
• Epoxy coated motor provides long service life against
abrasion from airborne debris.
• 2 wire double insulated 'S' jacket rubber cord provides
increased durability and life in hot and cold climates.
• Keyless adjustable guard allows for guard adjustments to
be made without tools.
• Low profile gearcase allows for work in tight areas.
• 5 position side handle provides improved ergonomics for
specific applications.
• Lightweight inceases productivity in extended use applications.
Specifications:
• Amps: 15.0 AC/DC Amps
• Max Watts Out: 3,084 W
• No Load Speed: 6,000 rpm
• Use Wheels RPM Above: 6,600 rpm
• Spindle Lock: Yes
• Spindle Thread: 5/8''-11
Includes:
• 7'' guard
• Side handle.
• Shipping Weight: 14.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 7''/ 9'' Large Angle Sander |
|
The D28497 Features:
• High power 4 HP motor with overload protection provides
higher operating speeds under load.
• 6,000 rpm is a midrange speed for use with multiple accessories.
• Epoxy coated motor provides long service life against
abrasion from airborne debris.
• 3 wire grounded 'S' jacket rubber cord provides
increased durability and life in hot and cold climates.
• Durable magnesium gearcase is easy to control.
• 3 position side handle provides improved ergonomics for
specific applications.
• Lightweight inceases productivity in extended use applications.
Specifications:
• Amps: 15.0 AC/DC Amps
• Max Watts Out: 3,084 W
• No Load Speed 6,000 rpm
• Use Wheels RPM Above: 6,600 rpm
• Spindle Lock: Yes
• Spindle Thread: 5/8''-11
Includes:
• Side handle
• Shipping Weight: 14.00 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 7''/ 9'' 5.3 HP Large Angle Grinder |
|
The D28499X Features
- High power 5.3 HP (maximum motor HP) 6,000 rpm motor with overload protection provides higher operating speeds under load
- Epoxy coated field and armature provide long service life against abrasion from airborne debris
- Keyless adjustable guards allow for guard adjustments to be made without tools
- Rotating rear handle provides improved ergonomics in cutting and grinding applications
- Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
- 6,000 rpm provides optimal material removal with 9" grinding wheels
- 2 wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates
- Low profile gearcase allows for work in tight areas
- 5 position side handle provides improved ergonomics for specific applications
- Lightweight inceases productivity in extended use applications
Specifications
- Amps 15.0 AC/DC Amps
- Max Watts Out 3,950 W
- No Load Speed 6,000 rpm
- Use Wheels RPM Above 6,600 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 20.7 "
Includes
- 7" & 9" guard
- 5 position side handle
• Shipping Weight: 18.40 lbs. |
|
|
|
|
| |
|
|
Click To
Enlarge Photo |
DeWALT Heavy-Duty 4-1/2'' Paddle Switch Grinder (grounded) |
|
The DW802G Features:
- 9.0 amp motor designed for faster material removal and increased lfie
- Grounded 3-wire plug construction designed for contractors requiring grounded tools
- Non-Lock on Switch can not be locked on under any condition
- Keyless guard can be adjusted without the use of tools
Specifications:
- Amps 9.0 AC/DC Amps
- Max Watts Out 1,000 W
- No Load Speed 10,000 rpm
- Use Wheels RPM Above 11,000 rpm
- Spindle Lock Yes
- Spindle Thread 5/8"-11
- Tool Length 11.5 "
- Tool Weight 5.1 lbs
Includes:
- side handle
- keyless guard
- backing flange
- clamp nut
- wrench
- grinding wheel
• Shipping Weight: 6.40 lbs. |
|
|
|
|
| |
|
|
Next >>
