|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (6)(Viewing 1 - 5) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 31-120 12'' Disc Sander with Integral Dust Collection |
|
Delta Model 31-120 12" Disc Sander with Integral Dust Collection includes
a 1/2HP, 120V motor; hose with 2 1/2" I.D. connectors, 80-grit abrasive
disc, wrenches and instruction manual.
The Delta Difference
Powerful, 1/2HP, 120V motor for long lasting, smooth.
Manual brake stops sanding disc in seconds.
Heavy-duty, steel disc plate features a 12" diameter, 80-grit abrasive
disc for fast, efficient sanding.
Tilting cast-iron table with 90 digress and 45° positive stops locks in
position with spring-loaded, table-locking handles.
Cast-iron base with pre-drilled base holes for quick and easy bench
mounting.
Dust hose with 2 1/4" I.D. connectors attaches quickly to any standard
shop vacuum.
Integral dust collection fan draws dust away from table and into hose for
cleaner sanding operation.
The Delta 12" Disc Sander features a 3/8" X 3/4" miter gage slot machined
into the table for projects that require sanding an angle or straight edge.
Additional Specifications:
Motor
1/2 HP
Disc Diameter
12"
Speed
Belt: 1971 SFPM (601 SMPM)
Disc: 1725 rpm
Disc Diameter
12"
Table
Size: 17 1/4" X 6 1/4"(438 X 159 mm)
Tilt:45° up and down
Miter Gage Groove: 3/8" X 3/4"
Overall Dimensions
Height: 15"(381 mm)
Depth: 17 3/4"(451 mm)
Width: 17 1/4"(438 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 31-300 Sanding CenterTM |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 31-300 Sanding CenterTM with a 1 1/2 HP, 120/240V TEFC
motor, on/off switch, stand, dust collector connector, 100 grit abrasive belt,
80 grit abrasive disc and instruction manual.
The Delta Difference
Moveable deflector allows for more efficient dust collection.
Powerful 1 1/2 HP TEFC motor for long-lasting smooth performance;
features manual thermal overload protector to prevent burn out.
Star-wheel, eccentric belt tracking control for easy, accurate belt
alignment.
Sturdy steel stand for greater operating stability.
Sturdy, extra large, cast-iron tables are ribbed to prevent distortion and tilt
+45 degrees for bevel sanding. Positive stops at 0-45 degrees with scale and
pointer.
Milled table slots permit use of accessory miter gage for accurate straight
and angle sanding.
Integral dust collector connector with single 4" diameter outlet.
Fully-machined and balanced steel disc for smooth, vibration free operation
and proper adhesion of adhesive discs.
Additional Specifications:
Motor
TEFC, 1 1/2 HP, 120/240V, 60 Hz
Speed
Belt: 3000 SFPM (915 SMPM)
Disc: 2100 RPM
Abrasive Belt
Length: 48" (1219 mm)
Width: 6" (152 mm)
Disc Diameter
12" (305 mm)
Table Size and Tilt
Belt: 14 3/4" x 7 3/8" (375 x 187 mm) Tilts +20 degrees and -45
degrees
Disc: 16 1/4" x 11 3/4" (413 x 298 mm) Tilts 0-45 degrees up and
down
Dust Collection Diameter
4"
Overall Dimensions
Belt in Vertical Position:
Width: 19" (482 mm)
Length: 31" (787 mm)
Height: 58" (1473 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 31-396 Oscillating Edge Sander |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 31-396 Oscillating Edge Sander with spindle sanding
attachment, 3 HP, 220V motor, heavy gage steel fence, miter gage, allen
wrench, hardware and instruction manual.
The Delta Difference
Idle roller can be used for edge sanding of irregular shapes.
Quick release belt tensioning for easier belt changing.
Front cast-iron sanding table can be moved up and down, forward and
backward.
Head that can go from 0 degrees to 90 degrees with indent stops at 0, 45
and 90 degrees.
Spindle sanding kit with 3 sizes of drums and collars for contour sanding.
Sanding platen can tilt from 0 degrees to 90 degrees or any angle in
between.
Powered by a 3 HP, 220V single phase motor.
Additional Specifications:
Motor
Single Phase, 3HP, 220V, 1720 RPM
Belt Size
6" x 108"
Disc Diameter
N/A
Belt Speed
3150 FPM
Front Table Size
35 3/8" x 12"
Auxiliary Table Size
11 3/8" x 8 7/8"
Platen Tilting
0 - 90 Degrees
Table Adjustment
Up: 3 1/2"
Forward: 4 3/4"
Oscillating Distance
3/4"
Dust Collection Chute
4"
Sanding Drums
Diameter: 1 1/2", 2", 3"
Long: 4 1/2"
Overall Dimensions
Height: 47 3/4"
Width: 27 1/2"
Length: 60 5/8"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 31-735A 6'' Belt/12'' Disc Finishing Machine |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 31-735A 6" Belt/12" Disc Finishing Machine with a 1 1/2 HP,
240V 60 Hz., 3450 rpm single phase TEFC motor and push-button switch
includes two tilting tables, 4 1/2" arbor pulley, guard for arbor pulley, V-belt,
80-grit aluminum oxide belt and 50-grit aluminum oxide disc.
NOTE: Single-phase electrical will be supplied wired for 230V. Three-phase
electrical will be supplied wired for 230V, unless 460V is specified. Power
Cord and Plug supplied or single phase only. Motors and Motor Controls for
Delta Finishing Machines may be ordered unmounted.
The Delta Difference
Delta 6" Abrasive Belt Finishing Machine and the Delta 12" Abrasive Disc
Finishing Machine with integrated dust collection and integrated mobile base
are comprised in one compact, efficient combination.
Handles 90 to 95% of all your finishing operations.
4" dust port can be used with 5 micron bag provided or can be attached to
a standard 4" dust collection system.
Integrated mobile base for ease of mobility.
Powered by a heavy-duty, 1 1/2 HP, TEFC motor.
Offers the right speeds-2100 rpm for disc unit and 3030 fpm for the belt
unit-making it well suited for both metal and wood shops.
Belt operates at any angle-vertically, horizontally or any degree in
between.
Power take-off spindle for mounting pneumatic sanding drums,
abrasive flap wheels, buffing wheels, flex shaft and other accessories
to handle a wide variety of extra jobs.
Large tables are scientifically ribbed to prevent distortion.
Belt table tilt up to 45 degrees out and 20 degrees in, disc table tilts 45
degrees out for angle finishing operations.
Special sliding pivot pine incorporated in the disc sander table facilitates
circle sanding up to 24" diameter and a full 48" with accessory table
extension.
Additional Specifications:
Motor
1 1/2 HP, 240V, 60 Hz.
Belt Size
6" x 48"
Belt
Belt Speed: 3000 SFPM
Disc Speed: 2100 SFPM
Platen Sizes
7 1/2" x 14"
Table Size
Belt Table: 15" x 7 1/2"
Disc Table: 16 1/2" x 12"
Dust Collection Ports
4" Dia.
Overall Dimensions
Height: 58"
Width: 35"
Depth: 21"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 31-735B 6'' Belt/12'' Disc Finishing Machine |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 31-735B 6" Belt/12" Disc Finishing Machine with a 1 1/2 HP,
200/230/460V 60 Hz., 3450 rpm three phase TEFC motor and 24V
push-button station, magnetic starter, transformer and 3-leg overload
protection (LVC), two tilting tables, 4 1/2" arbor pulley, guard for arbor
pulley, V-belt, 80-grit aluminum oxide belt and 50-grit aluminum oxide disc.
NOTE: Three-phase electricals will be supplied wired for 230V, unless 460V
is specified. Power Cord and Plug supplied for single phase only. Motors and
Motor Controls for Delta Finishing Machines may be ordered unmounted.
The Delta Difference
Delta 6" Abrasive Belt Finishing Machine and the Delta 12" Abrasive Disc
Finishing Machine with integrated dust collection and integrated mobile base
are comprised in one compact, efficient combination.
Handles 90 to 95% of all your finishing operations.
4" dust port can be used with 5 micron bag provided or can be attached to
a standard 4" dust collection system.
Integrated mobile base for ease of mobility.
Powered by a heavy-duty, 1 1/2 HP, TEFC motor.
Offers the right speeds-2100 rpm for disc unit and 3030 fpm for the belt
unit-making it well suited for both metal and wood shops.
Belt operates at any angle-vertically, horizontally or any degree in
between.
Power take-off spindle for mounting pneumatic sanding drums,
abrasive flap wheels, buffing wheels, flex shaft and other accessories
to handle a wide variety of extra jobs.
Large tables are scientifically ribbed to prevent distortion.
Belt table tilt up to 45 degrees out and 20 degrees in, disc table tilts 45
degrees out for angle finishing operations.
Special sliding pivot pine incorporated in the disc sander table facilitates
circle sanding up to 24" diameter and a full 48" with accessory table
extension.
Additional Specifications:
Motor
1 1/2 HP, 240V, 60 Hz.
Belt Size
6" x 48"
Belt
Belt Speed: 3000 SFPM
Disc Speed: 2100 SFPM
Platen Sizes
7 1/2" x 14"
Table Size
Belt Table: 15" x 7 1/2"
Disc Table: 16 1/2" x 12"
Dust Collection Ports
4" Dia.
Overall Dimensions
Height: 58"
Width: 35"
Depth: 21"
|
|
|
|
| |
|
|
|
|
Next
Delta X5
