|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (15)(Viewing 6 - 10) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 36-750B 10'' Deluxe Hybrid Saw |
|
For a Limited Time Get Free Ground Shipping
The Delta Difference
1-3/4 HP continuous duty, fan-cooled motor 115/230 volts (wired 115V)
Full cabinet
Deluxe miter gauge
Large cast iron table with two cast iron wings
Independent height and bevel adjustment wheels
Left tilting blade
50" Biesemeyer Commercial Fence
45 and 90 degree bevel stops adjustments on table top
Oversized on/off switch
Additional Specifications:
Motor: 1-3/4 HP, 120/240V (Wired 120V), 60 hz
Arbor Size: 5/8" "
Blade Diameter: 10" (254 mm) "
Blade Speed: 3,000 RPM RPM
Max Rip To Right Of Blade: 30" (762 mm); 50" (1270 mm) "
Max Rip To Left Of Blade: 13-1/2" (343 mm) "
Depth Of Cut At 45 Degrees: 2-1/8" (54 mm) "
Depth Of Cut At 90 Degrees: 3-1/8" (79 mm) "
Distance, front of table to center of blade: 17-1/2" (444 mm) "
Table in Front of Saw at Max. Depth of Cut: 12-1/8" (308 mm) "
Max Width Of Dado: 13/16" (21 mm) "
Miter Gauge Groove: T-Slot: 3/8" X 3/4" (10 x 19 mm)
Chip Exhaust Opening: 4" (101 mm) "
Table Height: 33-3/4" (857 mm) "
Table Size: With extension wing & table board: 54" x 27" (1372 x 686 mm) "
Length: 54" "
Width: 27" "
Height: 33 3/4" "
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 36-790 14''/16'' Tilting Arbor Saw |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 36-790 14"/16" Tilting Arbor Saw includes a 7 1/2 HP,
200-220/440V (wired for 200-220V), 60 Hz., 3 phase motor with
magnetic starter and automatic reset overload; blade guard splitter, Biesemeyerฎ Commercial
Fence System, guide bar, miter gage, 43"
x 59" table with two extension wings and fence support extension.
The Delta Difference
A powerful 7 1/2 HP motor handles the hardest woods. The standard
14" blade has a 4 1/2" depth-of-cut, 3 1/8" at a 45ฐ angle. Attach a
16" blade and increase the depth-of-cut to 5 1/2" and 4 1/8" at a
45ฐ angle.
The drive system is powered by a totally enclosed, fan-cooled 7 1/2 HP
motor. Double V-belt drive can be set for speeds of 3000 or 4500
rpm for best cutting performance. Motor plate, trunnions and arbor support
bracket are constructed of cast-iron for solid support and vibration-free
operation at the saw arbor. Arbor runs on pre-lubricated, sealed ball
bearings and raises to the correct height and angle by a rack and worm
screw operating mechanism.
T-slots on either side of saw blade hold miter gage securely, even beyond
front of table. With miter gage fully extended, you get 30 1/2" cutoff on
1" stock using a 14" saw blade.
Saw blade stops, adjustable from the top of the table, assure perfect 90ฐ
and 45ฐ settings.
Massive table (includeing extension wings) is 43" x 59" in size, providing
extra support for handling large stock. Table is heavily-ribbed to prevent
warping and distortion.
The three-point locking Biesemeyerฎ T-Squareฎ Commercial Saw
Fence System ensures the fence will be precisely parallel to the blade
and will provide a smooth clean cut accurate to 1/64th of an inch
Additional Specifications:
Motor
7 1/2 HP, 3 phase
Type of Motor
Induction
Key Feature
Double V-Belt
MOTOR
7 1/2 HP, 3 phase
DIAMETER OF ARBOR
1"
CAPACITIES
Maximum depth of cut (blade is not completely below table surface
in fully lowered position - .4" with 14" blade, 1.4" with 16" blade):
With 14" blade: 4 1/2" (114 mm)
With 16" blade: 5 1/2" (140 mm)
Maximum rip to right of blade: 51 3/16" (1300 mm)
Maximum thickness of cut at 45ฐ angle:
With 14" blade: 3 1/8" (79 mm)
With 16" bade: 4 1/8" (105 mm)
Distance, front of table to center of blade: 22 13/16" (579 mm)
Table in front of 14" blade at max. cut: 17 1/8" (435 mm)
Maximum width of cut-off:
With 14" blade (1" stock): 30 1/2 " (775 mm)
With width dado: 13/16" (21 mm)
Table
Height: 33 7/16" (849 mm)
Size: 39 3/8" x 43 1/4" (1000 x 1099 mm)
Size, including two extensions: 59" x 43.3" (1499 x 1100 mm)
T-slot miter gage groove on either side of saw blade
Removable table insert with built-in leveling screws
Cabinet SizeE
Width: 32 3/4" (832 mm)
Depth: 25 3/4" (654 mm)
Chip Exhaust Opening
4" O.D. (102 mm)
Arbor Speed
(2): 3000 & 4500 rpm
Overall Dimensions
Length: 49 1/2" (1257 mm)
Width: 98" (2489 mm)
Height: 41" (1041 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 36-977 10'' Left Tilt 1-1/2 Horsepower Contractor Saw with 30'' T2 Fence and 2 Steel Extension Wings |
|
Delta Model 36-977 Includes 1-1/2 HP, 115V/230V motor,
two steel extension wings, deluxe miter gauge, mobility
kit, see-thru blade guard with splitter, 10" saw blade,
table insert, V-belt arbor pulley, heavy-duty steel
stand, dust collection insert, DELTAฎ T2 30" Fence
and Rail and instruction manual.
The Delta Difference
Powerful 1-1/2 HP induction motor handles tough cutting
operations.
Large cast-iron table with steel extension wings measures
a full 40" x 27" for maximum material support.
0-45 degrees bevel tilts the blade away from the fence
(left tilt) in ripping applications to prevent tearout on
the outside corner of a mitered joint.
Mobile base attaches directly to heavy-duty,
wide-stance base for maximum saw support and mobility
in the shop.
Under-table dust collection tray accommodates 4"
dust hose hook-up for efficient dust and chip removal.
Cast-iron blade carriage mounts directly to cast-iron
table top for precise cutting and minimal vibration.
Deluxe T-slot miter gauge with adjustable stops at
45-degrees and 90-degrees.
Additional Specifications:
Motor
1-1/2 HP
Type of Motor
Induction
Key Feature
Mobility Kit
Motor Specs
115V/230V, 60 Hz
Blade
Diameter: 10"
Arbor: 5/8"
Speed: 3,000 RPM
Capacity
Max. depth of cut at 90-degrees: 3-1/8"
Max. depth of cut at 45-degrees: 2-1/8"
Max. rip to right of blade: 30"
Max. rip to left of blade: 13-1/2"
Max. width of dado blade: 13-16"
Blade tilt direction: Left
Table
Main Table: 20" x 27"
With Extension Wings: 40-1/2" x 27"
Overall Dimensions
Height: 39-1/2"
Width: 40-1/2"
Depth: 38-1/2"
Foot print (less foot lever): 24-3/16" x 27-1/4"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 36-979 10'' Left-Tilt 1-1/2 Horsepower Contractor Saw with No Fence, 115/230-Volt 1 Phase |
|
Delta Model 36-979 Includes 1-1/2 HP, 115V/230V motor, two
cast-iron extension wings, deluxe miter gauge, mobility kit,
see-thru blade guard with splitter, 10" saw blade, table
insert, V-belt arbor pulley, heavy-duty steel stand, dust
collection insert and instruction manual.
The Delta Difference
Powerful 1-1/2 HP induction motor handles tough
cutting operations.
Large cast-iron table with cast-iron extension wings
measures a full 40" x 27" for maximum material support.
0-45 degrees bevel tilts the blade away from the
fence (left tilt) in ripping applications to prevent
tearout on the outside corner of a mitered joint.
Mobile base attaches directly to heavy-duty,
wide-stance base for maximum saw support and
mobility in the shop.
Under-table dust collection tray accommodates
4" dust hose hook-up for efficient dust and chip
removal.
Cast-iron blade carriage mounts directly to
cast-iron table top for precise cutting and
minimal vibration.
Deluxe T-slot miter gauge with adjustable
stops at 45-degrees and 90-degrees.
Saw accommodates multiple fence options
including the DELTAฎ 36-T30 for solid,
steel framed, T-square accuracy with 30" rip
capacity, the 36-U30 for solid, multi-position fence
versatility with 30" rip capacity and the 36-B30 for
super-solid, T-square accuracy with 30" rip capacity.
Additional Specifications:
Motor
1-1/2 HP
Type of Motor
Induction
Key Feature
Mobility Kit
Motor Specs
115V/230V; 60 Hz
Blade
Diameter: 10"
Arbor: 5/8"
Speed: 3,000 RPM
Capacity
Max. depth of cut at 90-degrees: 3-1/8"
Max. depth of cut at 45-degrees: 2-1/8"
Max. rip to right of blade: 30"
Max. rip to left of blade: 13-1/2"
Max. width of dado blade: 13-16"
Blade tilt direction: Left
Table
Main Table: 20" x 27"
With Extension Wings: 40-1/2" x 27"
Overall Dimensions
Height: 39-1/2"
Width: 40-1/2"
Depth: 38-1/2"
Foot print (less foot lever): 24-3/16" x 27-1/4"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 36-980 10'' Left Tilt 1-1/2 Horsepower Contractor Saw with 30'' T2 Fence and 2 Cast-Iron Extension Wings |
|
For a Limited Time Get Free Ground Shipping
Delta Model 36-980 Includes 1-1/2 HP, 115V/230V motor,
two cast-iron extension wings, deluxe miter gauge,
mobility kit, see-thru blade guard with splitter, 10"
saw blade, table insert, V-belt arbor pulley,
heavy-duty steel stand, dust collection insert,
DELTAฎ T2 30" Fence and Rail and instruction manual.
The Delta Difference
Powerful 1-1/2 HP induction motor handles tough
cutting operations.
Large cast-iron table with cast-iron extension
wings measures a full 40" x 27" for maximum
material support.
0-45 degrees bevel tilts the blade away from the
fence (left tilt) in ripping applications to
prevent tearout on the outside corner of a
mitered joint.
Mobile base attaches directly to heavy-duty,
wide-stance base for maximum saw support and
mobility in the shop.
Under-table dust collection tray accommodates 4"
dust hose hook-up for efficient dust and chip
removal.
Cast-iron blade carriage mounts directly to
cast-iron table top for precise cutting and
minimal vibration.
Deluxe T-slot miter gauge with adjustable
stops at 45-degrees and 90-degrees.
Additional Specifications:
Motor
1-1/2 HP
Type of Motor
Induction
Key Feature
Mobility Kit
Motor Specs
115V/230V; 60 Hz
Blade
Diameter: 10"
Arbor: 5/8"
Speed: 3,000 RPM
Capacity
Max. depth of cut at 90-degrees: 3-1/8"
Max. depth of cut at 45-degrees: 2-1/8"
Max. rip to right of blade: 30"
Max. rip to left of blade: 13-1/2"
Max. width of dado blade: 13-16"
Blade tilt direction: Left
Table
Main Table: 20" x 27"
With Extension Wings: 40-1/2" x 27"
Overall Dimensions
Height: 39-1/2"
Width: 40-1/2"
Depth: 38-1/2"
Foot print (less foot lever): 24-3/16" x 27-1/4"
|
|
|
|
| |
|
|
|
|
1 2 3
Next
Delta X5
