|
|
 |
|
Best in Class 5 Year Warranty.
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta X5 Search: Matches Found (6)(Viewing 1 - 5) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 28-475X X5 14'' Band Saw w/Enclosed Stand |
|
For a Limited Time Get
Free Ground Shipping
Delta X5 Model 28-475X 14" Band Saw w/Enclosed Stand includes
machine with enclosed stand, 1 1/2 HP, 115/230V, guarded drip proof
motor with resilient mount, push button switch, chip chute, blade and belt
guards, arbor and motor pulleys and V-Belt, blade guides, Platinum Pro
band saw blade, RAPID-RELEASE blade tension lever, integrated 4"
dust port and instruction manual.
The Delta Difference
5 YEAR WARRANTY. All X5 series tools are backed by a "best in class"
5 year warranty. That is 3-4 years longer than other brands.
1 1/2 HP, 115/230V, guarded drip proof motor with resilient mount.
Platinum Pro Band Saw Blade.
Integrated 4" dust port.
Additional Specifications:
Motor
1 1/2 HP, 115/230V, 60Hz., single phase
Capacities
Blade to Frame: 13 3/4"
Under Guide and Wheel: 6 1/4"
Under Guide and Wheel (with 28-984 accy. height attachment): 12 1/4"
Speeds
3000 SF/M
Table
Size: 16" x 16"
Miter Gage Grooves: 3/8" deep x 3/4" wide
Tilt: to right, 45 degrees; to left, 9 degrees
Height from Floor: 42 3/4"
Blade
Width: 1/4" supplied
Maximum: 3/4" Max.
Length: Maximum: 94"
Minimum: 91 1/2"
Standard: 93 1/2"
Length (with 28-984 accy. height attachment):
Maximum: 106"
Minimum: 103 1/2"
Standard: 105"
Overall Dimensions
Height on Stand: 65 1/2"
Width on Stand: 25"
Front to Rear: 17 1/2"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 31-260X X5 18'' x 36'' Drum Sander |
|
For a Limited Time Get Free Ground Shipping
Delta Model 31-260X includes 1-1/2HP, 120 Volts motor, 1/30 HP DC, 90 Volts permanent magnetic motor, 5-80 grit sanding wraps and 4-120 grit sanding wraps, steel stand, instruction manual.
The Delta Difference
Powerful 1-1/2 HP Induction Motor with a 6 groove belt for maximum power transfer and an 18" drum for superior material removal
The 31-260X has a rigid, welded C-frame head assembly that eliminates loose movement in the sanding drum resulting in superior parallelism of the work piece.
Large sturdy steel cabinet style base dampens vibration for super smooth finish sanding. The cabinet style base easily converts to a user installed "Woodworker's Pantry" for sandpaper roll storage.
Blow-molded integral dust hood with a positive lock secure seal is designed to extract dust from the entire drum without letting dust escape, keeping your shop air clear of harmful fine dust
Up-front, motor controls and redesigned easy-to-read thickness gauge for accurate finish sanding. Large paddle type on/off switch for operator convenience and safety.
Single-piece, cast-iron table construction is supported on each corner by precision-machined screws for accuracy, stability and easy adjustments.
Outboard shaft accommodates accessory pneumatic drums for contour sanding.
Conveyor motor is positioned on the rear of the unit to pull workpiece in the most efficient manner.
DELTA has redesigned the best 1-1/2 HP drum sander on the market for increased stability, less vibration, enhanced end user touch points and a redesigned 4" ported dust hood.
The 31-260X includes 5-80 grit sanding wraps and 4-120 grit sanding wraps. A $50 Value
Additional Specifications:
Motor: 1-1/2 HP, 120V, 1 Phase, 60 hz
Abbrasive Belt Size: N/A "
Disc Diameter: N/A "
Speeds: Drum Speed: 2210 or 3300 SFPM
Table Size: N/A "
Miter Gauge Groove: N/A
Platen Tilting: °
Table Tilt: N/A °
Dust Port Diameter: 4" (102 mm) "
Sanding Drum: N/A
Width: 28-1/2" (724 mm) "
Length: 24-1/2" (622 mm) "
Height: 46" (1168 mm) "
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 33-895X X5 12'' Radial Arm Saw |
|
For a Limited Time Get
Free Ground Shipping
Delta X5 Model 33-895X 12" Radial Arm Saw includes a 2 HP, 230V,
60Hz., 3450 rpm, single phase motor, on-off key lock switch and overload
protection, set of legs, automatic mechanical brake, blade guard with
anti-kickback attachment, retractable leaf guard, 12" combination blade,
wrenches and instruction manual.
The Delta Difference
5 YEAR WARRANTY. All X5 series tools are backed by a "best in class"
5 year warranty. That is 3-4 years longer than other brands.
2 HP, 230V, 60Hz., 3450 rpm, single phase motor.
On-off key lock switch and overload protection.
Blade guard with anti-kickback attachment.
Additional Specifications:
Motor
2 HP, 230V, 60Hz., single phase
Blade
Diameter: 12"
Arbor: 5/8"-12 LH Acme
Capacity
Max. Depth of Cut: 3 3/4"
Dado Capacity: 1 13/16"
Max. Depth of Cut at 45 degrees: 1 1/4"
Crosscut: 14 3/8"
Rip: 24 1/4"
Positive Stops
Bevel Positive Stops: 0, 45, 90 degrees
Miter Positive Stops: 90 degrees and 45 degrees R & L
Table
25 1/2" x 30"
Overall Dimensions
Height: 63 1/2"
Width: 30"
Length: 32"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 37-275X X5 6'' Professional Jointer |
|
For a Limited Time Get
Free Ground Shipping
Delta X5 Model 37-275X 6" Professional Jointer includes a 1 HP,
120/240V, induction motor; enclosed stand, dust collector connector,
center-mounted fence, 3-knife cutterhead, cutterhead guard, push blocks
and instruction manual.
The Delta Difference
5 YEAR WARRANTY. All X5 series tools are backed by a "best in class"
5 year warranty. That is 3-4 years longer than other brands.
1 HP, 120/240V, induction motor.
3-knife cutterhead.
Additional Specifications:
Motor
1 HP, 120/240V, 60Hz., single phase, 3450 rpm
Cutting Capacity
Width: 6 1/8"
Depth: 1/8"
Rabbeting: 1/8"
Cutterhead
Speed: 4800 rpm, 14,400 cpm
Number of Knives: 3
Diameter: 2 1/2"
Table
Length: 46"
Length of Rear Table: 22 1/2"
Length of Front Table: 22"
Height from Floor: 32 1/2"
Fence
Size: 4 7/8" x 35"
Tilts In and Out: 45 Degrees Right & Left
Positive Stops: 90 degrees, 45 degrees R & L
Overall Dimensions
Width: 46"
Depth: 28 1/2"
Height: 48 1/2"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 37-365X X5 8'' DJ20 Precision Jointer |
|
For a Limited Time Get
Free Ground Shipping
Delta X5 Model 37-365X 8" DJ20 Precision Jointer includes a 1 1/2 HP,
120/240V, 60Hz., single phase motor, 3-knife cutterhead module,
cutterhead guard with wrenches, rabbeting ledge, tilting fence, push blocks
and two pulleys.
The Delta Difference
5 YEAR WARRANTY. All X5 series tools are backed by a "best in class"
5 year warranty. That is 3-4 years longer than other brands.
1 1/2 HP, 120/240V, 60Hz., single phase motor.
3-knife cutter head module.
Additional Specifications:
Motor (Enclosed Stand)
1 1/2 HP, 120/240V, 60Hz., single phase TEFC, 3450 rpm
Cutting Capacity
Width: 8"
Depth: 5/8"
Rabbeting Capacity: 5/8"
Cutterhead
Speed: 5500 rpm, 16,500 cpm
Number of Knives: 3
Diameter: 3 3/8"
Runs on Sealed, Lubricated-For-Life Ball Bearings
Table
Length: 76 1/2"
Length of Rear Table (outfeed): 32"
Length of Front Table (infeed): 42"
Height from Floor: 32"
Fence
Size: 5" x 35"
Tilts In and Out: 45 degrees
Positive Stops: 90 degrees, 45 degrees in and out
Overall Dimensions
Height: 32"
Width: 26"
Length: 76 1/2"
|
|
|
|
| |
|
|
|
|
Next
Delta X5
