|
  Click To
Enlarge Photo |
Dremel 1pc Chain Saw Sharpening Attachment - 1453 |
|
The 1453 Features:
• The sharpener attaches easily to select rotary tools
• Gauge, spacers and 30º angle guides on the attachment make
sharpening easy
• 1/8" shank sharpening stones with tip widths from 5/32" to 7/32"
• Compatible with Models 275, 285, 395, 398, 400, 780 and 800.
Includes:
• Sharpening Attachment
• Three sharpening stones: #453, #454 and #455
• Gauge
• Two spacers
• Wrench
• Instruction manual |
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel Scroll saw stand - 18500 |
|
The 18500 Features:
• All-steel construction.
• Leg pads keep the stand from slipping.
• For Model 1800 Dremel Scroll Station
• Painted finish resists rusting.
Includes:
• Leg Stand
• Assembly Hardware
• Assembly Instructions |
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel Magnifier for Scroll Station - 18505 |
|
The 18505 Features:
• Bendable, repositionable "gooseneck" shaft holds magnifier
where you want it.
• Mounts on the Dremel 1800 Scroll Station.
• Zoom in on projects where detail is critical.
• 18505 Magnifier for Scroll Station
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel WorkStation - 220 |
|
The 220 Features:
• Drill accurate perpendicular and angled holes.
• Holds your tool in place for applications like sanding and buffing.
• The telescoping flex shaft holder extends to any height between 16
and 29 inches.
• The Articulating Drill Press Feature drills perpendicular and angled
holes in 15-degree increments, up to 90 degrees horizontal.
• The Tool Holder Feature holds tool at 90 degrees horizontal for
polishing and sanding.
• Crow's nest provides on-board storage for drill bits, wrenches,
and other Dremel accessories.
• The Cord Management clips allow for safe storage of power cords.
• This attachment has an inch and metric marking on the base for accurate
drilling of work piece.
• Depth markings with depth stop provide for consistent depth adjustment.
• This attachment has a sturdy Metal Base with 4 Clamping Points to
securely hold work piece.
Specifications:
• Drill Depth: 2 inches
• Fits Tool Model: 275, 285, 300, 395, 398, 400 XPR, 780, 800
• Base: 56 square inches |
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 1pc Flex Shaft Tool Holder - 2222 |
|
The 2222 Features:
• Conveniently suspendsany Dremel Rotary Tool above your workbench
• Perfect for use with the Flex-Shaft attachment
• Clamps to workbenches up to 1 3/4" thick, and adjusts in height
from 12" to 42"
• Store extra bits on base
• Compatible with Models 275, 285, 395, 398, 400 and 800. |
|
|
|
| |
|
Next
Tools
