|
  Click To
Enlarge Photo |
Porter-Cable MS200 16 Ga., Medium Crown Stapler Kit |
|
The MS200 Features:
• Drives Senco type "N" wire 16 Ga. 7/16" crown construction
staples from 1" to 2" long
• Powerful piston with Teflon® ring design that prevents cylinder
bore scuffing - lasts far longer than conventional "O" rings
• Tool-free adjustable exhaust diffuser
• Open top-load hard coat anodized magazine with push-button
follower accommodates two 70-staple strips or three
50-staple strips
• Quick-release nosepiece for easy jam removal
• Tool-free depth-of-drive adjustment to enable fastening without
staple drive-through
• Standard Equipment: Stapler, 3/8" NPT air inlet w/ 1/4" male
quick plug with dirt & dust cover, rugged carrying case, oil and
operating manual
Specifications:
• Fastener Type (Inches): 16 Ga. 7/16" Crown Staple
• Fastener Range (In): 1 to 2
• Magazine Capacity: 150 Staples
• Jam Clearance: Hinged Lever Type Quick Release Nose
• Operating Pressure: 70-120 psi
• Firing Modes: Sequential & Bump Fire
• Height (Inches): 10-3/4
• Length (Inches): 14-1/8
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 18 Ga., 1'' Narrow Crown Stapler Kit |
|
The NS100B Features:
- Long life maintenance-free motor to keep from staining the work surface
- Internal piston catch for consistent max power on every shot
- Rear exhaust to keep contaminates away from work
- Drives 18 gauge staples with 1/4'' crown from 1/2” to 1” length
- Tool-free depth-of-drive adjustment with detents for proper setting of staples
- Split nose design for easy removal of jammed staples
- Sequential style trigger with lock off switch
- Removable non-marring nose tip with on tool storage
- Adjustable belt hook
- Integrated rubber grip for improved comfort
- Low staple reload indicator
- Special harden driver blade
- Strong & lightweight die-cast aluminum body
Specifications:
- Magazine capacity: 100 Staples
- Firing Modes: Sequential
- Jam Clearance: Split Nose Design
- Operating Pressure: 70-120 psi
- Fastener Type: 18 Ga. 1/4'' Crown Staple
- Fastener Range: 1/2'' to 1''
- Height: 8.76''
- Length: 10.25''
- Weight: 2.6 lbs
- Shipping Weight: 6.5 lbs
Includes:
- 1,000 18 Ga. 1'' staples
- 1/4'' fitting
- safety glasses
- carrying case
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 18 Ga., 1-1/2''Narrow Crown Stapler Kit |
|
The NS150B Features:
- Long life maintenance-free motor to keep from staining the work surface
- Internal piston catch for consistent max power on every shot
- Rear exhaust to keep contaminates away from work
- Drives 18 gauge staples with 1/4” crown from 1/2” to 1-1/2” length
- Tool-free depth-of-drive adjustment with detents for proper setting of staples
- Split nose design for easy removal of jammed staples
- Selectable trigger: restrictive or contact actuation mode
- Removable non-marring nose tip with on tool storage
- Adjustable belt hook
- Integrated rubber grip for improved comfort
- Low staple reload indicator
- Special harden driver blade
- Strong & lightweight die-cast aluminum body
Specifications:
- Magazine capacity: 100 Staples
- Firing Modes: Sequential & Bump
- Jam Clearance: Split Nose Design
- Operating Pressure: 70-120 psi
- Fastener Type: 18 Ga. 1/4'' Crown Staple
- Fastener Range: 1/2'' to 1-1/2''
- Height: 9.9''
- Length: 10.3''
- Weight: 2.8 lbs
- Shipping Weight: 6.7
Includes:
- 1,000 18 Ga. 1'' staples
- 1/4'' fitting
- safety glasses
- carrying case
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable PIN100 23-Gauge Pin Nailer Kit |
|
The PIN100 Features:
• Uses 23 Ga. Micro pin nails similar to Senco® models
• From 1/2" to 1" long
• Tool automatically adjusts for different fastener lengths.
Easier loading and less problems with pins out of spec.
• Bottom load magazine holds 170 pin micro nails
• Dual trigger feature
• Nail reload indicator
• Rubber comfort grip on tool handle
• Rear exhaust design to keep oil condensation away from work
• Standard Equipment: Nailer, box of 2,000 pin nails of 3/4",
1/4" plug with cap, oil, wrench, carrying case, and operating manual
Specifications:
• Fastener Type (Inches): 23 Ga. Pin Nails
• Fastener Range (In): 1/2 to 1
• Magazine Capacity: 170 Pins
• Operating Pressure: 60-100 psi
• Firing Modes: Dual Trigger
• Height (Inches): 6-1/4
• Length (Inches): 9
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable PN650 Palm Nailer Kit |
|
The PN650 Features:
• Capacity 1-1/4" to 6-1/2" nails (3d to 70d)
• Comes with four different nose tips:
-"No Mar" finish tip: for finish nail up to 3d
-Magnetic tip: for driving 3d to 16d common nails
-Standard tip: for common nails up to 70d
-Steel hammer kit: for moldings, dowels, automotive body work
• Ergonomic compact design for added comfort
• Depth-of-drive control
• Plenty of power for 6-1/2" nail
• Glove with padded Velcro strap
• Standard Equipment: Nailer, glove, magnetic tip, non-marring
finish tip, wide nail tip, hammer head tip, 1/4" plug with cap, oil,
wrench, carrying case, and operating manual
Specifications:
• Fastener Type (Inches): -
• Fastener Range (In): 1-1/4 to 6-1/2
• Magazine Capacity: -
• Operating Pressure: 50-120 psi
• Firing Modes: Multi Blow - 2,300 BPM @ 100 PSI
• Height (Inches):4-1/2
• Length (Inches): 5
|
|
|
|
| |
|
1 2 3 4
Next
Porter-Cable Warranties
