|
|
 |
|
|
 |
|
Max's Porter Cable Search: Matches Found (14)(Viewing 11 - 14) |
|
|

 Click To Enlarge Photo |
Porter Cable Razor Framer 7-1/4-Inch 20 Tooth Framing Saw Blade with 5/8-Inch and Diamond Knockout Arbor |
|
The 725VT20 Features:
- 7-1/4" variable 20-tooth carbide tipped saw blade
- Cuts dimensional lumber, plywood, and OSB faster and more clearly than conventional framing blades
- Combines fast-cutting teeth with smooth-cutting teeth for accelerated cut speed, cleaner cuts, and longer work life
- Features thin kerf C3 micrograin tungsten carbide tips, increased plate strength, a laser-cut plate for precision, and anti-kick tooth design
- Cuts quietly and with less effort
Specifications:
|
|
|
|
| |
|

 Click To Enlarge Photo |
Porter-Cable 9543 Quik-Change™ Jig Saw Kit |
|
The 9543 Features:
• Powerful 6 amp motor powers through even the hardest materials
• Quick-Change™ blade clamp allows fast blade changes - no tools required
• Unique guide system keeps blade running straight and true whether in vertical
or angle cuts up to 45° left or right
• Accepts tang-chank blades for reduced blade breakage
• Four-position selection lever for choice of reciprocating blade stroke
or three° of orbit
• Quick-Tilt™ base can be adjusted with built-in wrench - base includes
detents for accurate 15°, 30°, and 45° positioning left and right
• Extra-large base provides greater stability in all cuts and can be adjusted to
enable cuts close to a vertical surface
• Dust blower for clearing line of cut. May be turned off for metal cutting with coolants
• Dust collection capability when used with accessory vacuum collector and your vac
• Standard Equipment: Saw, blade #12701, non-marring base insert for delicate
surfaces #39195, anti-splinter base insert #39196, heavy-duty carring case #886778,
and operating manual
Specifications:
• Power: 120 VAC, 25-60 HZ
• Bearings: All Ball & Needle
• Length: 10 1/4"
• Motor Amps: 6
• Speed: 500-3,100 RPM
• Stroke: 1"
• Blade Action: Four Options Straight Up & Down plus 3 adjustable orbits
• Switch: Trigger
• Blade Guide: Pivoting
• Base: Tilt
• Capacity:
Wood: 4 1/3"
CRS: 3/8"
|
|
|
|
| |
|

 Click To Enlarge Photo |
Porter Cable 9748 Varable-Speed, Dual Action Quik-Change Tiger Saw Kit |
|
Porter Cable 9748 Variable-Speed, Dual Action Quik-Change TIGER SAW Kit. Extra-heavy-duty 11.5 AMP motor provides maximum power for all cutting applications. Standard Equipment: Saw, heavy-duty case and operating manual.
The 9748 Features:
- Extra-heavy-duty 11.5 AMP motor provides maximum power for all cutting applications.
- Electronic variable speed, 0-2,600 SPM, maintains speed under load for smooth consistent cutting.
- Quik-Change blade clamp for keyless blade changes in seconds.
- Full 1 1/8'' cutting stroke length cuts more stock in less time than shorted stroke saws.
- Quik-Change front shoe can be extended to utilize more of the blade's teeth in the cutting action.Allows for orbital cutting in wood and reciprocating cutting in metal for increased versatility.
- Ergonomic handle with soft grip.
Specifications:
- Stroke (Orbital/Recip.): 1 1/8''
- Motor Amps: 11.5
- No-load Speed (SPM): 0-2,600
Includes:
- Saw
- Heavy-duty case
- Operating manual
|
|
|
|
| |
|

 Click To Enlarge Photo |
Porter-Cable 9750 TIGERCLAW™ Variable Angle Tiger Saw® Kit |
|
The 9750 Features:
• Combines two adjustable gear housings to handle any conceivable cutting situation.
• Full 1 1/4" cutting stroke length.
• Rear gear housing adjusts as much as 180 degrees with 13 positive stop locations
for close quarters cutting.
• 8 1/2" in length at 90 degrees.
• Front gear housing scrolls 360 degrees with 12 positive stop locations.
• Extra-heavy-duty 11.5 AMP motor.
• Electronic variable speed, 0-2,900 SPM.
• Ergonomic handle with soft grip.
• Quik-Change™ front shoe can be extended to utilize more of the blade's teeth
in the cutting action.
• Quik-Change™ blade clamp for keyless blade changes in seconds.
• Standard Equipment: Saw, heavy-duty case for tool storage, blades and
operating manual.
Specifications:
• Stroke (Orbital/Recip.): N/A / 1 1/4"
• Motor Amps: 11.5
• No-load Speed: (SPM) 0-2,900
|
|
|
|
| |
|
|
|
Pages: Prev  1 2 3
|
Matches Found (14) (Viewing 11 - 14)
|
Porter-Cable Warranties
Virtual
Tours
Nailer
News Article
Porter-Cable Home
 |
|
|
| Home
| Back
| View Cart
| Free Catalog
| Search Index
| Email-us
|
© 2005 Max Tool All Rights Reserved. |
 |
 |
|