|
|
 |
|
Max's Porter Cable Search: Matches Found (30)(Viewing 21 - 25) |
|
|
  Click To
Enlarge Photo |
Porter-Cable Height Adjustment Knob for 7539 Plunge Router |
|
The 75300 Features:
- Plunge router accessory
- Adds micro-height adjustment
- Installs easily
- Very Accurate
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable Height Adjuster |
|
The 75301 Features:
- Height adjuster for use with table routers
- Releases router motor and adjusts bit height
- Clamp router motor
- Make all your adjustments from above the router table
- For use with 891 and 892 fixed base routers
- Designed for use when router is inverted in a router table
- Enables user to release the motor clamp, adjust bit height and secure the motor clamp from above the table
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 7538 Speedmatic® 3-1/4 Peak HP Plunge Router |
|
The 7538 Features:
• 15 Amps, AC only
• 21,000 RPM with soft start
• 1/2" collet
• Auto-release collet system ends "frozen" bits
• Unique design puts bottom bearing closer to work for minimum bit
run-out and vibration
• 3" plunge range with fully enclosed springs
• Depth rod, and 6 position step turret
• Precision machined aluminum motor housing & base
• 100% sealed ball bearings
• Standard Equipment: Router motor, base, 1/2" collet #42950,
collet wrenches #42596, and operating manual
Specifications:
• Power: 120 VAC, 25-60 HZ
• Base Dia.: 7"
• Peak HP: 3 1/4
• Rated Input Current (Amps): 15
• No-Load Speed (RPM): 21,000 with soft-start
• Collets:
Standard: 1/2"
Available: 1/4" & 3/8"
• Plunging Depth: 3"
• Width: 11 1/4"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 7539 Speedmatic® 3-1/4 Peak HP Five-Speed Plunge Router |
|
The 7539 Features:
• 15 Amps, AC only
• 100% sealed ball bearings
• Electronic five-speed with soft start 10,000, 13,000, 16,000, 19,000,
21,000 RPM
• Maintains constant speed under load
• 1/2" collet
• Auto-release collet system ends "frozen" bits
• Unique design pus bottom bearing closer to work fro minimum bit
run-out and vibration
• 3" plunge range with fully enclosed springs
• Depth rod, and 6 position stop turret
• Precision machined aluminum motor housing & base
• Standard Equipment: Router motor, base, 1/2" collet #42950,
collet wrenches #42596, and operating manual
Specifications:
• Power: 120 VAC, 60 HZ
• Base Dia.: 7"
• Peak HP: 3 1/4
• Rated Input Current (Amps): 15
• No-Load Speed (RPM): 5 speed with soft-start 10,000, 13,000,
16,000, 19,000, and 21,000
• Collets:
Standard: 1/2"
Available: 1/4" & 3/8"
• Plunging Depth: 3"
• Width: 11 1/4"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 891 2-1/4 Peak HP GripVac™ Router |
|
The 891 Features:
• Soft-starting, 12-amp motor featuring full-time electronic feedback
(10,000 - 23,000 RPM)
• Motor transitions quickly between GripVac™ base (included),
plunge base (8931), and traditional spiral down bases (690 series)
• Release the motor, adjust bit height, and clamp the motor from above the
router table with 3/16" hex socket (not included) or
model # 75301 kit (not included)
• Handle-access, dual-position on/off switch with automatic bit-changing
lock-"off"
• Macro-height lever for coarse adjustments and tool-less motor release
• Fine depth settings to 1/128" with micro-adjustment knob
• GripVac™ handle for single hand gripping, palm gripping, and
through-the-top dust collection
• Standard Equipment: Includes router motor #8902, base, 1/4" collet #42999,
1/2" collet #42950, collet wrench #42596, GripVac™ handle,
carrying case and operating manual.
Specifications:
• Power: 120V AC, 60 Hz
• Peak HP: 2 1/4
• Rated Input Current (Amps): 12
• Motor Diameter: 3 1/2"
• No-Load Speed (RPM): 10,000 - 23,000
• Collets: 1/4" & 1/2"
• Base: Round
|
|
|
|
| |
|
|
1 2 3 4 5 6
Next
Porter-Cable Warranties
