|
|
 |
|
Max's Porter Cable Search: Matches Found (23)(Viewing 16 - 20) |
|
|
  Click To
Enlarge Photo |
Porter Cable Face Frame Plate Joiner Biscuits (125 pc) |
|
Specifications:
- Made of the best wood laminate for stability, strength and fit
- Fits all biscuit, plate joiners
- Number 10 biscuits measure 25/32" x 2-3/64''
- Fits slots cut by all standard plate jointers
- Swells when used with water-based glues to lock and strengthen the joint
- 125 piece container
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable 557 Deluxe Plate Joiner Kit |
|
The 557 Features:
• 7.5 Amp, 120 VAC only, 10,000 RPM
• 1" O.D. dust port accepts standard bag or can be connected to a vacuum
• Fence tilts from 0° to 135° with positive adjustable stop at 90°
• Precise micro height-adjustment knob
• Lock-on trigger
• Includes both 2" and 4" diameter blades for standard and face-frame biscuits
• Height scale accurate at any angle
• Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex,
and Max (#6) biscuits
• Spindle lock for easy blade changes
• Bale handle attached to fence, not motor, for greater stability and added control
during cuts
• Standard Equipment: Plate joiner, 2" blade #5559, 4" blade #5558,
centering plate #888776, dust bag #883175, chip deflector #886490,
allen wrench #891869, carrying case, and operating manual
Specifications:
• Power: 120 VAC, 25-60 HZ Only
• Motor Amps: 7.5
• Blade Speed: 10,000 RPM
• Blade Type: 6-Tooth (CT) & 4-Tooth (CT)
• Blade Size: 2" & 4"
• Height: 7"
• Biscuit Sizes: FF, #0, #10, #20, Simplex, Duplex, and #6
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable Door Hinge Template |
|
The 59370 Features:
- Used to rout both door and frame hinges for a complete door hanging solution
- Accommodates doors of various thickness - 1-3/8", 1-3/4", 2", 2-1/4", and 2-1/2"
- Accommodates 8 hinge sizes from 2-1/2" to 6" inclusive, in 1/2" increments
- Quick-adjust ratcheting router bit guides accommodate 1/4", 5/8" radius and square-cornered hinges*
- Extended template platform provides excellent router stability
- Double-headed nails ensure easy removal from door and frame
- Positive placement lock-in pins enable quick and secure placement of the template to the door and jamb
- *Corner chisel required (sold separately)
- Complements Strike & Latch Template 59375 (sold separately)
Includes:
- Door hinge template
- 2 ratcheting router bit guides
- 4 positive placement lock-in pins (2 spares)
- 2 Double-headed nails
- High-speed steel bearing guided bit
- Instruction sheet.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable Strike and Latch Template |
|
The 59375 Features:
- Used to rout both the strike and latch plate on doors and frames
- Accommodates doors of various thickness - 1-3/8", 1-3/4", 2", 2-1/4", and 2-1/2"
- Accommodates both 2-1/4" and 2-3/4" strike plate sizes
- Template center marks enable quick and easy alignment
- Extended template platform provides excellent router stability
- Double-headed nails ensure easy removal from door and frame
- Positive placement lock-in pins enable quick and secure placement of the template to the door and jamb
- Complements Door Hinge Template 59370 (sold separately)
Includes:
- Strike & Latch Template with 3 insert pieces
- 4 positive placement lock-in pins (2 spares)
- 2 Double-headed nails
- High-speed steel bearing guided bit
- Instruction sheet.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable Hinge Butt Template Kit |
|
The 59381 Features:
- Offers a quick, simple and accurate solution when hanging multiple doors
- Provides the capacity to hang both 3 and 4 hinge doors
- 3 hinge template set up enables the routing of hinges on doors and frames between 6' and 7' in height
- 4 hinge template set up enables the routing of hinges on doors and frames between 7' and 8' in height
- Accommodates hinge sizes from 3" to 6" in 1/2" increments
- Accommodates door thicknesses of 1-3/8", 1-3/4", 2", 2-1/4" and 2-1/2"
- Corner chisel accommodates square hinge corners
- End gages enable the simple setting of the distance from template to top and bottom of door
- Carbide tipped router bit and template guide included for 1/4" radius hinges
- 5/8" and 5/16" radius hinge corners can be accommodated with the use of bits and template guides (sold separately)
- All metal construction provides long term durability
Includes:
- 4 metal hinge templates
- 3 short steel rails
- 2 long steel rails
- Carbide tipped router bit
- Template Guide
- Locknut
- Corner Chisel
- 2 Pairs of end gages
- 8 Small thumb screws
- 6 Large thumb screws
- Hex key
- Instruction sheet
- Carrying case
|
|
|
|
| |
|
|
|
|
1 2 3 4 5
Next
Porter-Cable Warranties
