|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (2)(Viewing 0 - 2) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 28-206 14'' Band Saw with 1HP Motor & Enclosed Stand |
|
The Delta Difference
RAPID-RELEASE™ tension lever.
Full 16" X 16" cast-iron table tilts 45° right and 3° left for beveling
operations.
4" integral dust port.
Cast iron trunnions table support.
Lower blade guides have safe, accurate, micrometer adjustment.
Lower guides angled to support blade to within 3/4" of table work
surface-assures accurate cutting.
Additional Specifications:
Motor
1 HP
Capacity (ht. under guide)
6 1/4", 12 1/4" with No. 28-984 Height Attachment installed
Capacities
Frame to blade: 13 3/4"(349 mm)
Under guide and wheel: 6 1/4"(159 mm)
Under guide and wheel (with 28-984 height attachment): 12 1/4"(311 mm)
Speed:
28-206: 2500/3000 SFPM (762/914 SMPM)
28-276: 3000 SFPM (914 SMPM)
Table
Size: 16" X 16"(406 X 406 mm)
Groove: 3/8" X 3/4"(10 X 19 mm)
Tilt:45° R; 3°
Height from floor:42 3/4(1086 mm)
Blade
Width: 3/4"(19 mm) maximum
Length:
Maximum: 94"(2388 mm)
Minimum: 91 1/2"(2324 mm)
Standard: 93 1/2"(2324 mm)
Overall Dimensions
Heigth: 65 1/2"(1664 mm)
Width with open stand: 31"(787 mm)
Front to rear: 17 1/2"(445 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
14'' Band Saw with 3/4 HP Motor & Open Stand
14'' Band Saw with 3/4 HP Motor & Open Stand |
|
The 28-276 includes stand, 3/4 HP, 120/240 Volts motor and switch, quick release tension lever, 4'' dust collection port, 9-spoke wheel, blade and belt guards, arbor, motor pulleys and V-belt, blade guides, wood-cutting blade.
The Delta Difference
- Nine-spoke precision-balanced wheels.
- Full 16'' x 16'' cast-iron table tilts 45° right and 3° left for beveling operations
- Quick release tension lever
- 4'' integral dust port
- Cast-iron trunnions table support
- Capacity to cut stock up to 6-1/4'' thick (12-1/4'' with height attachment)
- Lower blade guides have safe, accurate, micrometer adjustment
- Lower guides angled to support blade to within 3/4'' of table work surface ensures accurate cutting
- Two-speed pulley position
- Fully-adjustable, upper and lower blade guides and blade support. Bearings maintain proper blade alignment
Additional Specifications
- Motor: 3/4 HP, 120/240V (wired 120V), 1 Phase, 60 Hz
- Motor Control: NA
- Blade Width: Max. 3/4''
- Blade Length: Min. 91-1/2''; Max. 94''; Standard 93-1/2''; Length (with 28-984 height attachment): Max. 106''; Min. 103-1/2''; Standard 105''
- Speeds: 3,300 SFPM
- Capacity Blade to Frame: 13-3/4''
- Capacity Under Guide and Wheel: 6-1/4''; With 28-984 height attachment: 12-1/4''
- Max Rip To Right Of Blade: NA''
- Max Rip To Left Of Blade: NA''
- Table Size: 16'' x 16''
- Table Size Front to Center of Blade: NA''
- Table Tilt: R-45°; L-3 °
- Table Height: 42-3/4''
- Height: 65-1/2''
- Width: 31''
- Depth: 17-1/2''
- Weight: 201 lbs
- Shipping Weight: 231 lbs
|
|
|
|
| |
|
|
|
|
Delta X5
