|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (2)(Viewing 0 - 2) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 32-325 Line Boring Machine |
|
Delta Model 32-325 Line Boring Machine with a 3/4HP, 1725 rpm, single
phase motor; table and fence assembly, left and right indexing pins, left and
right work stops, 13-spindle boring head, see through spindle guard,
telescoping handle, table, adjustable depth stop, steel support structure
and base, wrench and literature holder and instruction manual.
Show on optional 32-331 stand
The Delta Difference
Large, 16" X 29 3/4" table provides a full 12" of work space in front of
the boring head for boring extra-large boards.
Telescoping handle, featured on No.32-325, extends from 16" to 23"
for increased leverage when needed; retracts when not in use.
Fully-adjustable table and fence assembly features easy-to-read English
and Metric scales for quick set-up and accurate boring.
No.32-326 Pneumatic Line Boring Machine eliminates the need for
manual operation, increasing productivity and operator comfort.
Indexing pins help operator to maintain correct spindle alignment for
resuming line boring operations in long work pieces.
Work stops on either end of the fence allow operator to line up work
from the left or right for performing parallel oaring patterns.
Adjustable depth stop controls the downward travel of boring head.
Heavy-gage, sheet steel support structure has a sturdy steel base with
holes for bench or stand mounting.
Powerful 3/4HP motor delivers plenty of power and speed for multiple
hole boring even in the toughest laminates.
Large-capacity, 13-spindle boring head comes with a see-through
spindle guard for safety
Additional Specifications:
Speed Range
1725
Center Distance of Spindles
1 1/4"(32 mm)
Overall Dimensions
Length: 28 1/2"(724 mm)
Width: 30"(762 mm)
Height: 32 1/2"(826 mm)
Head Travel
2"
Horse Power
3/4 HP
Motor
3/4HP, 120V, 60 Hz., single phase
Drive
Direct
Spindle Speed
1725 rpm 13-Spindle Collect Diameter: 25/64"(10 mm)
Stroke Capacity
2"(51 mm)
Throat Capacity
4"(102 mm)
Table Size
16" X 29 3/4"(406 X 756 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 32-350 Horizontal Boring Machine |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 32-350 Horizontal Boring Machine with a 1HP, 3450 rpm,
115/230V, single phase motor, (wired for 230V operation); adjustable
hold-down clamp with see-thru guard, cast-iron table with dovetailed miter
gage slots, miter gage, adjustable stock stop adjustable boring head,
drill bit adapter, steel cabinet, foot pedal, dust chute, wrenches and
instruction manual.
The Delta Difference
Adjustable hold-down clamp and boring head are pneumatically
controlled by a foot pedal to keep operator's hands free. See-thru guard
protects from flying woodchips.
Heavy cast-iron table features dovetailed miter gage slots for keeping
miter gage secured when locked in place. Also with standard-equipped
stock stop for operations that require repetitive drilling.
Loosening the nuts just before the boring head allows the operator to
quickly adjust the depth stop for final drilling depth. Guide rails are
concealed inside flexible rubber tubing for protection against dust and
chips.
Tough cast-iron table is mounted on dovetail ways with an adjustable gib.
The four bolts located on the right-hand side may be adjusted to
compensate for wear.
Aluminum Boring Head contains two adjustable spindles. Easy-to-read
scales and reference lines for accurate setting. Convenient grease fitting
accepts standard grease gun for lubricating boring head.
Built-in chip chute directs dust and debris away from machine.
Cast-iron carriage supports motor and boring head.
Adjustable feed rate knob controls boring speed at which the drill bits
enter the work piece.
Fabricated steel cabinet has bolt-down feet for operating stability
Additional Specifications:
Motor Speed
3450
Table Travel to Center of Bit
3 1/2"(89 mm)
Maximum Material Thickness (Table to Guard)
8 1/2"(216 mm)
Table Size
15 3/4" X 9 7/8"(400 X 251 mm)
Overall Dimensions
Length: 37 1/2"(953 mm)
Width: 15 3/4"(400 mm)
Height: 48"(1219 mm)
Head Travel
3 7/8"
Horse Power
1 HP
Motor
1HP, 3450 rpm, 115/230V, 60 Hz., single phase
Spindle
Accepts 7/16" - 14 RH TPI
Maximum Bit Diameter with Spindles at 3/4" on Center
5/8"(15 mm)
Drill Stroke (CARRIAGE STROKE)
3 7/8"(98 mm)
Minimum/Maximum Center Distance of Spindle
3/4" to 3"(19 to 76 mm)
Air Requirement
90 PSI
|
|
|
|
| |
|
|
|
|
Delta X5
