|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (4)(Viewing 0 - 4) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 17-950L 16.5'' TwinLaser Crosshair Drill Press |
|
Buy a 16-1/2" Crosshair Laser Drill Press (Model 17-950L), get a $50.00 Rebate!
For details visit our Delta & Porter Cable Rebates page.
Offer expires on October 31, 2008
Free Ground Shipping
Delta Model 17-950L 16-1/2" Laser Drill Press with 1/2 HP
120V/60 Hz, 1720 RPM induction motor; fully adjustable
laser pod; flexible lamp provides extra light to the work
surface; tilting table; adjustable, locking depth stop;
rack and pinion table raising/lowering mechanism; 5/8"
capacity chuck and key; belt and pulleys; column and
base stand and instruction manual.
The Delta Difference
Flexible lamp provides extra light to the work surface.
Adjustable-position locking depth stop for accurate
depth measurement and repetitive drilling.
Bright laser crosshairs clearly indicate the drill point.
14" x 18" woodworker-friendly table includes T-slots,
a removable insert and tilts 0-45-degrees forward and
0-90-degrees left and right with positive stops at 0,
45 and 90-degrees.
Industrial induction motor for long-lasting,
smooth performance.
Twelve speeds for drilling a wide variety of woods,
plastics and metals.
Three-spoke pilot wheel for operator convenience.
Table tilts forward for angular drilling.
Bright laser lines cross to indicate drill point.
Three-spoke pilot wheel with 3-7/8" quill stroke.
Additional Specifications:
Speed Range
250-3000
Quill Travel
3-7/8"
Step Pulley or Variable Speed
Step Pulley
Motor
1/2 HP, 120V, single phase, 60 Hz., 1720 RPM
Spindle Speeds
12 (250, 360, 410, 540, 590, 650, 1090, 1280, 1450,
1820, 2180 and 3000 RPM)
Table
Tilting table with C-clamp edge and diagonal slots
Size: 14" x 18"
Quill Diameter
2"
Capacity
Key Chuck: 5/8"
Max dia. hole in steel: 5/8"
Max dia. hole in cast-iron: 5/8"
Overall Dimensions
Height: 66"
Width: 12-3/4"
Depth: 25-1/4"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 17-959L 17'' Laser Drill Press |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 17-959L includes Drill press with 3/4 HP
induction motor, 5/8" chuck, Laser pod, 12 mm allen wrench, 5 mm allen wrench, 4 mm allen wrench, 3 mm allen wrench, Drift key,
Instruction manual.
The Delta Difference
Fully adjustable laser pod projects a crosshair on the work piece to indicate the location of bit contact
Large, redesigned base helps promote greater tool stability
Woodworker's table has a removable insert for through drilling with large bits and accomodates sanding drums as well
Unique table is designed to eliminate auxillary fixtures by tiliting left and right & forward
Large quill stroke capacity allows users to drill a variety of demanding operations
Heavy-duty 3/4 HP motor provides ample power for demanding applications
Largest in class cast iron head provides smooth drilling with minimal vibration
Integrated task light provides improved visibility in the drilling area
Additional Specifications:
Motor: 3/4 HP
Motor Control: On/Off Push Button
Speeds: 215 - 2750 RPM
Table Size: 18" x 14" (457 x 356 mm)
Table Tilt: 0-90 Left & Right; 0-45 Forward
Table Insert: 3-3/4" x 3-3/4" (95 x 95 mm)
Column Diameter: 3.15"
Quill Diameter: 1-3/4" (44 mm)
Quill Stroke: 4-7/8" (124 mm)
Key Chuck Capacity: 5/8" (16 mm)
Chuck to Table Capacity: 24-1/2" (622 mm)
Chuck to Base Capacity: 44-1/2" (432 mm)
Height: 70" (1778 mm)
Width: 18" (457 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta DP300L 12'' TwinLaser Crosshair Drill Press |
|
Delta Model DP300L 12" Laser Drill Press with 120V/60Hz,
1720 RPM induction motor; fully adjustable laser pod;
drill press utility tray; flexible lamp provides extra
light to the work surface, tilting table; adjustable,
locking depth stop; rack and pinion table
raising/lowering mechanism; 1/2" capacity chuck and
key; belt and pulleys; column and base stand and
instruction manual.
The Delta Difference
Flexible lamp provides extra light to the work surface.
Durable, textured plastic, 11" diameter tray keeps tools
within reach; swings out of way when necessary.
Industrial induction motor for long lasting, smooth
performance.
Bright laser crosshairs clearly indicate the drill point.
Tilting table for angular drilling, with side ledges and
slots for fast clamping of work.
Five speeds for drilling a wide variety of woods,
plastics and metals.
Adjustable-position locking depth stop for accurate
depth measurement and repetitive drilling.
Fully adjustable TWINLASERฎ Pod.
Bright laser lines cross to indicate drill point.
Three-spoke pilot wheel with 2-3/8" quill stroke.
Additional Specifications:
Motor
120V, 60 Hz, single phase, 1720 RPM
Speed Range
620-3100
Table
Tilting table with C-clamp edge and parallel slots
Size: 8-1/2" x 9-7/8"
Quill Travel
2-3/8"
Quill Diameter
1-1/2"
Capacity
Key Chuck: 1/2"
Max dia. hole in steel: 3/8"
Max dia. hole in cast-iron: 1/2"
Step Pulley or Variable Speed
Step Pulley
Overall Dimensions
Height: 32"
Width: 18"
Depth: 13"
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta DP350 12'' Variable Speed Bench Drill Press |
|
Delta Model DP350 12" Variable Speed Bench Drill Press with a
1/3HP, 120V motor; tilting table, table raising mechanism, 1/2"
capacity chuck and key, belt and pulleys, light, and instruction manual.
The Delta Difference
Induction motor for long-lasting, smooth performance.
Pivoting motor mount maintains correct belt tension and facilitates
speed changes.
Three-spoke pilot wheel for operator convenience.
Adjustable-position, locking depth stop for accurate depth
measurement and repetitive drilling.
Tilting table with slots for fast clamping of work.
Standard 3-jaw, 1/2" capacity chuck for positive gripping of various
drill press cutting tools.
Additional Specifications:
Speed Range
500-3100
Spindle and Chuck Taper
Jacobs 33
Quill
Diameter: 1 1/2"(38 mm)
Stroke: 3 1/4" (83 mm)
Capacities
Key chuck: 1/2"(0 to 13 mm)
Chuck to table: 14 1/8"(359 mm)
Chuck to base: 19"(483 mm)
Max. dia. hole in steel: 3/8"(10 mm)
Max. dia. hole in cast-iron: 1/2"(13 mm)
Overall Dimensions
37"H X 11"W X 22"D (559 X 279 X 940 mm)
Quill Travel
3 1/4"
Step Pulley or Variable Speed
Variable Speed
Motor
1/3HP, 120V, single phase, 60 Hz., 1725 rpm
Motor Control
Toggle switch with removable lock out key
Spindle Speeds
Variable (500 - 3100)
Table
Tilting 90 degrees left and right
9 1/2" x 9 1/2"
Base
16" X 10"
Column Diameter
2 3/8"(60 mm)
|
|
|
|
| |
|
|
|
|
1
|
Matches Found (4) (Viewing 0 - 4)
|
Delta X5
Table Saws
Miter Saws
Radial Arm Saws
Band Saws
Scroll Saws
Drilling Machines
Jointers/Planers
Shapers & Stock Feeders
Wood Lathes
Sanders
Grinders
Dust Management
Accessories
|
|
|
| Home
| Back
| View Cart
| Free Catalog
| Search Index
| Email-us
|
ฉ Max Tool All Rights Reserved. |
 |
|
|
