|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (5)(Viewing 0 - 5) |
 |
|
|
|

 Click To Enlarge Photo |
Delta 37-360 DJ-30 12'' Jointer, 220-230/460-Volt, 3 phase |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 37-360 DJ-30 12" Jointer with a three-phase,
3HP motor, set of three knives, cutterhead assembly,
cutterhead guard, wrenches, rabbeting ledge, tilting
fence, push blocks and instruction manual.
The Delta Difference
Versatile 5 1/2" X 47" fence tilts in and out at
45° and features positive stops at both 45° and 90°.
Hinged door and removable door panel allow for
easy access to the motor and V-belts.
Center-mounted fence safely encloses the rear of
the cutterhead when working to the front of the
machine. Rack and pinion movement for smooth,
precise adjustment.
Infeed and outfeed tables have an easy-to-use
lever for raising and lowering table bed.
English/Metric depth-of-cut scale is an accurate
guide for measuring cutting depth.
Large 3 7/8" -diameter, 3-knife cutterhead
operates at 5000 rpm for producing 15, 000 cuts
per minute.
The infeed and outfeed tables are constructed
of cast-iron and are heavily ribbed underneath
for solid support.
Parallelogram support system allows the table
to move up or down in the same arc as the
cutterhead, allowing less space between the
table and cutterhead for safer, more efficient
cutting.
Push-button on/off switch is positioned high
above the table for reaching easily and safely.
Replaceable, ductile, iron-serrated table rips
for noise reduction.
Dust hood with 5" diameter outlet accepts dust
collection systems for collecting dust and chips.
Additional Specifications:
Motor
3 HP
Cutting Capacity (max. width)
12"
Cuts Per Minute
15,000
Cutting Capacity
Width: 12"(304 mm)
Depth: 3/4"(19 mm)
Rabbeting Capacity: 3/4"(19 mm)
Cutterhead
Speed: 5,000 rpm; 15,000 CPM
Number of Knives: 3
Diameter: 3 7/8"(98 mm)
Table
Length: 84"(2134 mm)
Length of Infeed Table: 41 1/2"(1054 mm)
Length of Outfeed Table: 41 1/2"(1054 mm)
Width: 13"(330 mm)
Height from Floor: 32"(813 mm)
Fence
Size: 5 1/2" X 47"(140 X 1194 mm)
Tilts In and Out: 45°
Positive Stops: 90°, 45° In and Out
Dust Chute: 5" Outside Diameter (127 mm)
Overall Dimensions
Length: 84"(2134 mm)
Width: 40"(1016 mm)
Height: 43"(1092 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 37-361 12-Inch 3 Horsepower Jointer, 230-Volt 1 Phase |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 37-361 DJ-30 12" Jointer with a single-phase,
3HP motor, set of three knives, cutterhead assembly,
cutterhead guard, wrenches, rabbeting ledge, tilting
fence, push blocks and instruction manual.
The Delta Difference
Versatile 5 1/2" X 47" fence tilts in and out at
45° and features positive stops at both 45° and 90°.
Hinged door and removable door panel allow for
easy access to the motor and V-belts.
Center-mounted fence safely encloses the rear of
the cutterhead when working to the front of the
machine. Rack and pinion movement for smooth,
precise adjustment.
Infeed and outfeed tables have an easy-to-use
lever for raising and lowering table bed.
English/Metric depth-of-cut scale is an accurate
guide for measuring cutting depth.
Large 3 7/8" -diameter, 3-knife cutterhead
operates at 5000 rpm for producing 15, 000 cuts
per minute.
The infeed and outfeed tables are constructed
of cast-iron and are heavily ribbed underneath
for solid support.
Parallelogram support system allows the table
to move up or down in the same arc as the
cutterhead, allowing less space between the
table and cutterhead for safer, more efficient
cutting.
Push-button on/off switch is positioned high
above the table for reaching easily and safely.
Replaceable, ductile, iron-serrated table rips
for noise reduction.
Dust hood with 5" diameter outlet accepts dust
collection systems for collecting dust and chips.
Additional Specifications:
Motor
3 HP
Cutting Capacity (max. width)
12"
Cuts Per Minute
15,000
Cutting Capacity
Width: 12"(304 mm)
Depth: 3/4"(19 mm)
Rabbeting Capacity: 3/4"(19 mm)
Cutterhead
Speed: 5,000 rpm; 15,000 CPM
Number of Knives: 3
Diameter: 3 7/8"(98 mm)
Table
Length: 84"(2134 mm)
Length of Infeed Table: 41 1/2"(1054 mm)
Length of Outfeed Table: 41 1/2"(1054 mm)
Width: 13"(330 mm)
Height from Floor: 32"(813 mm)
Fence
Size: 5 1/2" X 47"(140 X 1194 mm)
Tilts In and Out: 45°
Positive Stops: 90°, 45° In and Out
Dust Chute: 5" Outside Diameter (127 mm)
Overall Dimensions
Length: 84"(2134 mm)
Width: 40"(1016 mm)
Height: 43"(1092 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 37-380 8'' Professional Jointer |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 37-380 8" Professional Jointer with a 1 1/2HP, 120/240V motor;
enclosed stand, dust collector connector, center-mounted fence, 3-knife
cutterhead guard, push blocks and instruction manual.
The Delta Difference
Enclosed a steel cabinet houses a powerful 1 1/2HP motor and includes an
integral dust connector with 4" diameter outlet for easy dust collection
hook-up.
Rack and pinion fence adjustment for precise fence movement.
Large, cast-iron in feed and out feed tables support extra long stock.
Safety cutterhead guard pivots out of the way of work during operations.
Conveniently-positioned, on/off paddle switch is placed high above the
table.
Extra-large, center-mounted, cast-iron fence provides maximum work
support throughout the cut and tilts 45° in and out.
In feed table positioning lever is easy to use for fast, accurate height
adjustments.
Additional Specifications:
Motor
1 1/2 HP
Cutting Capacity (max. width)
8"
Cuts Per Minute
16,800
Cutting Capacity
Width: 8"(203 mm)
Depth: 1/2"(13 mm max.)
Rabbeting: 1/2"(13 mm)
Cutterhead
Diameter: 2 1/2"(64 mm)
Number of knives: 3
Speed: 5600 rpm, 16,800 cpm
Table
Length: 72 3/4"(1848 mm)
Length of in feed table: 35 1/4"(895 mm)
Length of outfeed table: 35 5/8"(905 mm)
Height from floor 32 1/2"(826 mm)
Fence
Size: 4 7/8" X 35"(124 X 889 mm)
Tilt: 45° in and out
Positive stops: 90° and 45° in and out
Overall Dimensions
Depth: 34"(864 mm)
Width: 72 3/4"(1848 mm)
Height: 48"(1219 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta JT160 6'' Variable Speed Bench Jointer |
|
Delta Model JT160 6" Variable Speed Bench Jointer with a 10 amp., 120V
motor; 2-knife cutterhead, cutterhead guard, push blocks, wrenches and
instruction manual.
The Delta Difference
Variable 6,000 to 11,000 rpm speed range allows you to select the right
speed for the size and hardness of the material you're cutting.
Center-mounted fence gives needed support throughout the cut for
accurate edge jointing.
Fence tilts 0° to 45° outward for bevel jointing & chamfering; features
positive stops at 45° & 90°.
Poly-V belt drive for maximum transmission of power to cutterhead with
minimum belt slippage.
Balanced cutterhead for smooth operation and maintenance-free life.
Two-knife cutterhead with jack-screw knife leveling arrangement for easy
replacement and adjustment of individual knives.
Built-in cutterhead lock facilitates knife replacement and adjustment.
Convenient, in feed table raising/lowering control with dual English/Metric
scale facilitates depth of cut adjustment; lock knob securely holds desired
setting.
Built-in chip chute directs dust and chips away from operator, motor and
electricals.
Rubber base pads minimize operating vibration and dampen noise level.
Extra-large table provides ample work support for surfacing stock up to a
full 6" wide.
Additional Specifications:
Motor
10 amp
Cutting Capacity (max. width)
6 1/8"
Cuts Per Minute
12,000-22,000
Cutting Capacity
Max. Width: 6 1/8"(156 mm)
Max. Depth: 1/8"(3 mm)
Cutterhead
Number of knives: 2
Variable Speed 6,000 to 11,000 rpm 12,000 to 22,000 cuts per min
Table
Size: 6 3/16" X 30"(157 X 762 mm)
Fence
Size: 4 1/4" X 19 3/4"(108 X 502 mm)
Tilt: 45° out
Positive stops: 90° and 45°
Overall Dimensions
Height: 13 1/2"(343 mm)
Length: 30"(762 mm)
Width: 18"(457 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta JT360 6'' Deluxe Jointer |
|
For a Limited Time Get
Free Ground Shipping
Delta Model JT360 6" Deluxe Jointer with a 3/4HP, 120/240V induction
motor; stand, dust chute, center-mounted fence, three-knife cutterhead,
cutterhead guard, push blocks and instruction manual.
The Delta Difference
Heavy-duty, 3/4HP, 115/230V induction type motor.
Cast-iron wedge bed for solid support with fully adjustable in feed and out
feed tables that operate on gibbed dovetailed ways to compensate for wear.
Safety cutterhead guard for operator protection pivots out of the way of
work during operation.
Heavy-gage steel stand with wide footprint design for sturdy support
features built-in dust chute to direct dust and chips away from operator;
facilitates dust collection hook-up.
Toggle switch with removable lock out key to prevent unauthorized use of
machine.
Lever-actuated in feed table with lock handle for quick, easy height
adjustment.
Center-mounted 4 7/8" X 35" fence for maximum work support throughout.
Fence tilts for beveling and chamfering operations; features adjustable
positive stops at 90° and 45° positions. Functions as a rear cutterhead guard
on narrow cuts.
Easy-to-read 0 to 1/2" depth-of-cut scale with automatic stop at 1/8" setting
facilitates fast set-up for repetitive finish jointing.
Full 6" X 46" table handles extra-long stock. In feed table features cast-iron
8 3/4" X 3" support ledge for rabbeting operations. Safety cutterhead guard
pivots out of the way of work during operation.
Additional Specifications:
Motor
3/4 HP
Cutting Capacity (max. width)
6"
Cuts Per Minute
14,400
Cutting Capacity
Width: 6 1/8"(156 mm)
Depth: 1/8"(3 mm)
Rabbeting: 1/2"(13 mm)
Cutterhead
Diameter: 2 1/2"(64 mm)
Number of knives: 3
Speed: 4800 rpm, 14,400 cpm
Table
Length: 46"(1168 mm)
Length of rear table(outfeed): 22 1/2"(572 mm)
Length of front table(infeed): 22"(559 mm)
Height from Floor: 33 3/8"(848 mm)
Fence
Size: 4 7/8" X 35"(124 X 889 mm)
Tilt: 45° in and out
Positive stops: 90°; 45° in and out
Overall Dimensions
Height: 39"(991 mm)
Length: 46"(1168 mm)
Width: 28"(711 mm)
|
|
|
|
| |
|
|
|
1 Next
|
Matches Found (5) (Viewing 0 - 5)
|
Delta X5
Table Saws
Miter Saws
Radial Arm Saws
Band Saws
Scroll Saws
Drilling Machines
Jointers/Planers
Shapers & Stock Feeders
Wood Lathes
Sanders
Grinders
Dust Management
Accessories
|
|
|
| Home
| Back
| View Cart
| Free Catalog
| Search Index
| Email-us
|
© Max Tool All Rights Reserved. |
 |
 |
|