|
|
 |
|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (7)(Viewing 0 - 5) |
 |
|
|
|
  Click To
Enlarge Photo |
Delta 22-450 DC-580 20'' Planer |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 22-450 DC-580 20" Planer with a 3-phase, 5HP motor with
magnetic motor starter and automatic reset overload protection; 3-knife
cutterhead, sectional serrated in feed roll, double bed rolls and polyurethane
out feed roll, sectional chip breakers, dust chute, knife-setting gage, and
wrench.
The Delta Difference
Up-front controls include a handy lever for instantly engaging and
disengaging feed rolls and push-button on/off switch.
Double V-belt drive runs the 3 1/8" diameter 3-knife cutterhead, producing
15,000 cuts per minute.
Large 22" X 28" precision-ground table contains two adjustable bed rollers
for smooth feeding of uneven stock.
Large-diameter, micro-adjustable bed roll lever easily raises and lowers
bed rolls for quick set-ups. Conveniently placed to the right, a large
handwheel with locking knob adjusts table height. Also note the
easy-to-read English/Metric depth-of-cut scale on to frames.
Two sealed lead screws with adjustable gibs, keep the table true when
making height adjustment.
Standard-equipment knife-setting gage is included for accurately setting
the three-knife cutterhead. The chip breakers and pressure bar may be
lifted for making blade changing even easier.
Massive gear box uses large chain drive to power the sectional serrated
steel in feed roller and large polyurethane out feed roller for maintaining a
positive feed.
Sectional serrated steel in feed roll with sectional chip breakers for planning
uneven stock.
Hinged side panel access doors make it easy to change feed rate speed
from 20 to 30 feet per minute.
Hinged dust hood features a built-in, 6" diameter dust chute.
Additional Specifications:
Motor
5 HP
Table Size
22" X 28"(559 X 711 mm)
Chip Chute Opening
6" O.D. Standard (152 mm)
Overall Dimensions
Height: 32"(813 mm)
Width: 44 1/2"(1130 mm)
Depth: 49"(1245 mm)
Max. Width of Stock (in.)
20
Capacities
Width of stock: 20"(508 mm)
Thickness of stock: 11/64" min.; 8 5/8" max.(4 mm; 219 mm)
Depth of Cut
Width Single-Phase: 1/8" max.(3 mm)
Width Three-Phase: 3/16" max.(5 mm)
Length of Unbutted Stock: 9" min.(229 mm)
Feed Rate
20/30 FPM (6/9.1 MPM)
Cutterhead
Number of knives: 3
Diameter: 3 1/8"(79 mm)
Speed: 5000 rpm; 15,000 cpm
Feed Rolls
Sectional Serrated In feed: 3" dia.(76 mm)
Polyurethane Out feed: 2 3/8" dia.(60 mm), adjustable
Table Bed Rolls (2): Adjustable
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 22-451 DC-580 20'' Planer |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 22-451 DC-580 20" Planer with a single-phase, 5HP motor
with magnetic motor starter and automatic reset overload protection; 3-knife
cutterhead, sectional serrated in feed roll, double bed rolls and polyurethane
out feed roll, sectional chip breakers, dust chute, knife-setting gage, and
wrench.
The Delta Difference
Up-front controls include a handy lever for instantly engaging and
disengaging feed rolls and push-button on/off switch.
Double V-belt drive runs the 3 1/8" diameter 3-knife cutterhead, producing
15,000 cuts per minute.
Large 22" X 28" precision-ground table contains two adjustable bed rollers
for smooth feeding of uneven stock.
Large-diameter, micro-adjustable bed roll lever easily raises and lowers
bed rolls for quick set-ups. Conveniently placed to the right, a large
handwheel with locking knob adjusts table height. Also note the
easy-to-read English/Metric depth-of-cut scale on to frames.
Two sealed lead screws with adjustable gibs, keep the table true when
making height adjustment.
Standard-equipment knife-setting gage is included for accurately setting
the three-knife cutterhead. The chip breakers and pressure bar may be
lifted for making blade changing even easier.
Massive gear box uses large chain drive to power the sectional serrated
steel in feed roller and large polyurethane out feed roller for maintaining a
positive feed.
Sectional serrated steel in feed roll with sectional chip breakers for planning
uneven stock.
Hinged side panel access doors make it easy to change feed rate speed
from 20 to 30 feet per minute.
Hinged dust hood features a built-in, 6" diameter dust chute.
Additional Specifications:
Motor
5 HP
Table Size
22" X 28"(559 X 711 mm)
Chip Chute Opening
6" O.D. Standard (152 mm)
Overall Dimensions
Height: 32"(813 mm)
Width: 44 1/2"(1130 mm)
Depth: 49"(1245 mm)
Max. Width of Stock (in.)
20
Capacities
Width of stock: 20"(508 mm)
Thickness of stock: 11/64" min.; 8 5/8" max.(4 mm; 219 mm)
Depth of Cut
Width Single-Phase: 1/8" max.(3 mm)
Width Three-Phase: 3/16" max.(5 mm)
Length of Unbutted Stock: 9" min.(229 mm)
Feed Rate
20/30 FPM (6/9.1 MPM)
Cutterhead
Number of knives: 3
Diameter: 3 1/8"(79 mm)
Speed: 5000 rpm; 15,000 cpm
Feed Rolls
Sectional Serrated In feed: 3" dia.(76 mm)
Polyurethane Out feed: 2 3/8" dia.(60 mm), adjustable
Table Bed Rolls (2): Adjustable
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 22-470 24'' 7-1/4 Horsepower Planer, 230/460-Volt 3 Phase |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 22-470 24" Planer with a 7 1/2HP, 3-phase
motor with magnetic motor starter and automatic reset
overload protection; 3-knife cutterhead, sectional
serrated infeed roll, double bed rolls and polyurethane
outfeed roll, sectional chipbreakers, dust chute,
knife-setting gage, wrench and instruction manual.
The Delta Difference
Standard-equipment knife-setting gage is included for
accurately setting the three-knife cutterhead.
Hinged side panel access doors make it easy to change
feed rate speed from 20 to 30 feet per minute.
English/Metric depth-of-cut scale is easy-to-read
for accurate cutting.
Massive gear box uses large chain drive to power the
sectional serrated steel infeed roller and
large polyurethane outfeed roller.
Sectional serrated steel infeed roller with sectional
chip breakers for planing uneven stock.
Up-front controls include a handy lever for instantly
engaging and disengaging feed rolls and
push-button on/off switch.
Large 22" X 28" precision-ground table contains two
adjustable bed rollers for smooth
feeding of uneven stock.
Microadjustable bed roll lever quickly raises and
lowers bed rolls.
Hinged dust hoods features a built-in, 6"
diameter dust chute.
Additional Specifications:
Motor
7 1/2 HP
Overall Dimensions
Height: 36"(914 mm)
Width: 48"(1219 mm)
Depth: 50"(1270 mm)
Max. Width of Stock (in.)
24
Feed Rate (ft./min.)
20/30
Controls
24-volt, low voltage control
Capacities
Max. width of stock: 24"(610 mm)
Max. thickness of stock: 8 5/8"(219 mm)
Min. thickness of stock: 11/64"(4 mm)
Depth of Cut
Full Width: 3/16"(5 mm)
Min. length of stock: 9"(229 mm)
Feed Rate: 20/30 FPM (6/9.1 MPM)
Cutterhead
Number of knives: 3
Diameter: 3 1/8"(79 mm)
Speed: 5000 rpm (15,000 cpm)
Feed Rolls
Sectional Serrated Infeed: 3" dia.(76 mm)
Polyurethane Outfeed: 2 3/8" dia.(60 mm), adjustable
Table Bed Rolls (2): Adjustable
Table Size: 22" X 28"(559 X 711 mm)
Chip Chute Opening: 6" O.D. Standard (152 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 22-580 13'' Two-Speed Finishing Planer |
|
The Delta Difference
Two-speed material feed rate system: dimensioning speed (60 CPI) to
quickly reach desired thickness; finishing speed (90 CPI) for an ultra
smooth surface on final pass.
Patented cutterhead lock stabilizes cutterhead to virtually eliminate snipe.
High-speed, double-sided knives.
Full-range depth stop for repeatable thicknesses at any dimension across
the entire height range.
Blade zero indicator sets the cutterhead to the exact thickness of the
material.
Oversized cutterhead height handle with indexing ring.
Cutterhead wrench and blade magnet to minimize blade contact
Additional Specifications:
Motor
15 amp
Overall Dimensions
Depth:: 27 3/4"(705 mm)
Width: 17 1/2"(444.5 mm)
Height: 23 1/4"(591 mm)
Max. Width of Stock (in.)
13
Feed Rate (ft./min.)
20/30
Motor Controls
Oversized on/off paddle switch
Capacities
Max. Width of stock: 13"(330 mm)
Max. Thickness of stock: 6 1/2"(165 mm)
Min. Thickness of Stock: 1/8"(3 mm)
Depth of Cut
Max on 6" board: 1/8"(3 mm)
Max on 13" board: 1/16"(1.6 mm)
Min. Length of Unbutted Stock: 10"(254 mm)
Feed Rate: 20/30 FPM (6/9.1 MPM)
Cutterhead
Number of Knives: 2
Diameter: 2"(51 mm)
Speed: 10,000 rpm
Feed Rollers
1 3/8" dia.(35 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Delta 22-610 RC-63D 24 3/4in X 9 3/8in Planer |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 22-610 RC-63D 24 3/4" X 9 3/8" Planer with a 10HP,
200-220/440V (wired 220V), 60 Hz., three-phase motor with
24-volt LVC magnetic starter and automatic reset overload;
standard 4-knife cutterhead; set of four case hardened,
high-speed steel knives and knife setting gage.
The Delta Difference
Power-driven table raises and lowers simply and quickly.
Fine adjustments are made using the convenient hand wheel.
Lumber gauge enables operator to measure stock thickness
quickly.
Rear pressure bar maintains even force on planed stock;
outfeed roll helps maintain positive feeding under all
conditions.
Efficient, fully accessible drive system makes it easy to
change feed speed by simply move V-belt from one pulley
step to the other.
Standard equipment dust chute has a 6" opening for easy
connection to a central dust collection system.
Outfeed roll is driven through feed gear box and supplies
power to the infeed roll and table raising and lowering
gear box mechanism. Heavy duty chains and sprockets are
used throughout the system.
Complete cutterhead and feed group are modulary mounted
to the machine frame, including seperate bearing blocks
for cutterhead. This allows the entire cutterhead to be
removed without disturbing feed system settings. System
also includes twelve 2" wide sectional chip breakers for
full width, even pressure on wide, tapered stock. Full
width anti-kickbacks provide added safety.
Spacious table raises and lowers on four precision,
self-locking screws. Solid steel gibs keep table in
perfect alignment regardless of thickness of cut.
Dust-proof rubber boots protect screws from abrasive
dust and moisture.
Large 24" X 35 1/2" precision-ground table is
equipped with two adjustable bed rolls located
directly below feed rolls for smooth, positive
feeding. Bed roll height can be quickly adjusted
from the front of the machine to suit variations
in planing condidtions.
Additional Specifications:
Motor
10 HP
Feed Rolls
Spiral in-feed: 2.75" dia.(70 mm)
Outfeed: 2.75" dia.(70 mm), adjustable
Table bed rolls (2): adjustable
Table Size
24 3/4" X 35 1/2"(629 X 902 mm)
Table Rise and Fall
power driven fine adjustment by handwheel
Chip Chute Opening
6"(152 mm)
Overall Dimensions
Height: 42 1/8"(1070 mm)
Width: 43"(1092 mm)
Depth: 37 1/2"(953 mm)
Max. Width of Stock (in.)
24.8
Feed Rate (ft./min.)
25/46
Motor (RC-63D)L
10HP, 200, 220/440V (wired 220V), three-phase
Controls
24-volt, low voltage control
Capacities
Max. width of stock: 24.8"(630 mm)
Max. thickness of stock: 9.38"(238 mm)
Min. thickness of stock: 1/8"(3 mm)
Depth of Cut
Maximum .39"(10 mm)
Full width planing: 1/8"(3 mm)
Min. length of stock: 11"(279 mm)
Feed Rates
25/46 FMP (7.6/14 MPM.)
Cutterhead
Standard knife: 4
Diameter:4.72"(120 mm)
Speed: 5000 rpm
|
|
|
|
| |
|
|
|
1 2  Next
|
Matches Found (7) (Viewing 0 - 5)
|
Delta X5
Table Saws
Miter Saws
Radial Arm Saws
Band Saws
Scroll Saws
Drilling Machines
Jointers/Planers
Shapers & Stock Feeders
Wood Lathes
Sanders
Grinders
Dust Management
Accessories
|
|
|
| Home
| Back
| View Cart
| Free Catalog
| Search Index
| Email-us
|
© Max Tool All Rights Reserved. |
 |
|
|
