|
Your achievement. Our tools.
|
|
|
 |
Max's Delta Machinery Search: Matches Found (13)(Viewing 0 - 5) |
 |
|
|
|

 Click To Enlarge Photo |
Delta 36-715 10'' Hybrid Saw with T2 30'' Fence and Rail |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 36-715 10" Hybrid Saw with T2 30" Fence and Rail includes
a 1 3/4 HP, 120V/240V motor; deluxe see-thru blade guard with splitter
and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10" saw blade,
table insert, arbor pulley, poly v-belt, cabinet and instruction manual. The
Model 36-715 comes with Rail and T2 30" Fence.
The Delta Difference
Guard locks in the up position for improved blade depth measurement
Improved floor-to-table cabinet for maximum stability and dust collection,
1 3/4 HP, continuous-duty, fan-cooled motor. Factory wired to 115V
(220V capable).
Deluxe T-Slot miter gauge for maximum crosscutting convenience
Extra-large table surface with left & right cast iron wings
Independent height and bevel adjustment wheels
Left tilting blade tilts away from fence
45-degree and 90-degree bevel stops adjustable from the table top; HD
miter gauge
Oversized on/off switch with full overload protection.
Additional Specifications:
Motor
1 3/4 HP, 120V/240V, 60 Hz
Type of Motor
Induction
Blade
Diameter: 10"
Speed: 3000 RPM
Arbor: 5/8"
Capacity
Max. depth of cut at 90 degrees: 3 1/8"
Max. depth of cut at 45 degrees: 2 1/8"
Max. rip to right of blade: 30"
Max rip to right of blade: 50" w/ optional fence systems, sold
separately.
Max. rip to left of blade: 13 1/2"
Max. width of dado blade: 13/16"
Table
Size with ext. wing & table board: 54" x 27"
Height: 33 3/4"
Overall Dimensions
Height: 39 1/2"
Width: 28 1/4"
Depth: 30 1/2"
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 36-717B 10" Hybrid Saw w/30'' BIESEMEYERฎ Commercial Fence System, Rail and Table Board |
|
Buy a 10"" Deluxe Hybrid Saw (Model 36-717B), get a $50.00 Mail-In Rebate! For details visit our Delta & Porter Cable Rebates page. Offer expires on July 31, 2008
For a Limited Time Get
Free Ground Shipping
Delta Model 36-717B includes 1-3/4 HP, 120 Volts (240V capable)
motor, deluxe see-thru blade guard with splitter and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10"" saw blade, table insert,
arbor pulley, poly v-belt, cabinet, rail, 30"" BIESEMEYERฎ Commercial Fence System, laminated table board, instruction manual, 36-946 Heavey
Duty Precision Miter Gauge.
The Delta Difference
Left tilting blade tilts away from fence.
Side table board included.
45ฐ and 90ฐ bevel stops adjustable from the table top; deluxe miter gauge.
Oversized on/off switch with full overload protection.
Excellent Controle & Accuracy for Cross Cutting
Additional Specifications:
Motor: 1-3/4 HP, 120/240V (Wired 120V), 60 hz
Arbor Size: 5/8"" (16 mm)
Blade Diameter: 10"" (254 mm)
Blade Speed: 3,000 RPM RPM
Max Rip To Right Of Blade: 30"" (762 mm)
50"" (1270 mm)
Max Rip To Left Of Blade: 13-1/2"" (343 mm)
Depth Of Cut At 45 Degrees: 2-1/8"" (54 mm)
Depth Of Cut At 90 Degrees: 3-1/8"" (79 mm)
Distance, front of table to center of blade: 17-1/2"" (444 mm)
Table in Front of Saw at Max. Depth of Cut: 12-1/8"" (308 mm)
Max Width Of Dado: 13/16"" (21 mm)
Miter Gauge Groove: T-Slot: 3/8"" X 3/4"" (10 x 19 mm)
Chip Exhaust Opening: 4"" (101 mm)
Table Height: 33-3/4"" (857 mm)
Table Size: With extension wing & table board: 54"" x 27"" (1372 x 686 mm)
Length: 30-1/2"" (775 mm)
Width: 28-1/4"" (718 mm)
Height: 39-1/2"" (1003 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 36-750B 10'' Deluxe Hybrid Saw |
|
Buy a 10" Deluxe Hybrid Saw (Model 36-750B), get a $50.00 Mail-In Rebate! For details visit our Delta & Porter Cable Rebates page. Offer expires on July 31, 2008
For a Limited Time Get Free Ground Shipping
The Delta Difference
1-3/4 HP continuous duty, fan-cooled motor 115/230 volts (wired 115V)
Full cabinet
Deluxe miter gauge
Large cast iron table with two cast iron wings
Independent height and bevel adjustment wheels
Left tilting blade
50" Biesemeyer Commercial Fence
45 and 90 degree bevel stops adjustments on table top
Oversized on/off switch
Additional Specifications:
Motor: 1-3/4 HP, 120/240V (Wired 120V), 60 hz
Arbor Size: 5/8" "
Blade Diameter: 10" (254 mm) "
Blade Speed: 3,000 RPM RPM
Max Rip To Right Of Blade: 30" (762 mm); 50" (1270 mm) "
Max Rip To Left Of Blade: 13-1/2" (343 mm) "
Depth Of Cut At 45 Degrees: 2-1/8" (54 mm) "
Depth Of Cut At 90 Degrees: 3-1/8" (79 mm) "
Distance, front of table to center of blade: 17-1/2" (444 mm) "
Table in Front of Saw at Max. Depth of Cut: 12-1/8" (308 mm) "
Max Width Of Dado: 13/16" (21 mm) "
Miter Gauge Groove: T-Slot: 3/8" X 3/4" (10 x 19 mm)
Chip Exhaust Opening: 4" (101 mm) "
Table Height: 33-3/4" (857 mm) "
Table Size: With extension wing & table board: 54" x 27" (1372 x 686 mm) "
Length: 54" "
Width: 27" "
Height: 33 3/4" "
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 36-790 14''/16'' Tilting Arbor Saw |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 36-790 14"/16" Tilting Arbor Saw includes a 7 1/2 HP,
200-220/440V (wired for 200-220V), 60 Hz., 3 phase motor with
magnetic starter and automatic reset overload; blade guard splitter, Biesemeyerฎ Commercial
Fence System, guide bar, miter gage, 43"
x 59" table with two extension wings and fence support extension.
The Delta Difference
A powerful 7 1/2 HP motor handles the hardest woods. The standard
14" blade has a 4 1/2" depth-of-cut, 3 1/8" at a 45ฐ angle. Attach a
16" blade and increase the depth-of-cut to 5 1/2" and 4 1/8" at a
45ฐ angle.
The drive system is powered by a totally enclosed, fan-cooled 7 1/2 HP
motor. Double V-belt drive can be set for speeds of 3000 or 4500
rpm for best cutting performance. Motor plate, trunnions and arbor support
bracket are constructed of cast-iron for solid support and vibration-free
operation at the saw arbor. Arbor runs on pre-lubricated, sealed ball
bearings and raises to the correct height and angle by a rack and worm
screw operating mechanism.
T-slots on either side of saw blade hold miter gage securely, even beyond
front of table. With miter gage fully extended, you get 30 1/2" cutoff on
1" stock using a 14" saw blade.
Saw blade stops, adjustable from the top of the table, assure perfect 90ฐ
and 45ฐ settings.
Massive table (includeing extension wings) is 43" x 59" in size, providing
extra support for handling large stock. Table is heavily-ribbed to prevent
warping and distortion.
The three-point locking Biesemeyerฎ T-Squareฎ Commercial Saw
Fence System ensures the fence will be precisely parallel to the blade
and will provide a smooth clean cut accurate to 1/64th of an inch
Additional Specifications:
Motor
7 1/2 HP, 3 phase
Type of Motor
Induction
Key Feature
Double V-Belt
MOTOR
7 1/2 HP, 3 phase
DIAMETER OF ARBOR
1"
CAPACITIES
Maximum depth of cut (blade is not completely below table surface
in fully lowered position - .4" with 14" blade, 1.4" with 16" blade):
With 14" blade: 4 1/2" (114 mm)
With 16" blade: 5 1/2" (140 mm)
Maximum rip to right of blade: 51 3/16" (1300 mm)
Maximum thickness of cut at 45ฐ angle:
With 14" blade: 3 1/8" (79 mm)
With 16" bade: 4 1/8" (105 mm)
Distance, front of table to center of blade: 22 13/16" (579 mm)
Table in front of 14" blade at max. cut: 17 1/8" (435 mm)
Maximum width of cut-off:
With 14" blade (1" stock): 30 1/2 " (775 mm)
With width dado: 13/16" (21 mm)
Table
Height: 33 7/16" (849 mm)
Size: 39 3/8" x 43 1/4" (1000 x 1099 mm)
Size, including two extensions: 59" x 43.3" (1499 x 1100 mm)
T-slot miter gage groove on either side of saw blade
Removable table insert with built-in leveling screws
Cabinet SizeE
Width: 32 3/4" (832 mm)
Depth: 25 3/4" (654 mm)
Chip Exhaust Opening
4" O.D. (102 mm)
Arbor Speed
(2): 3000 & 4500 rpm
Overall Dimensions
Length: 49 1/2" (1257 mm)
Width: 98" (2489 mm)
Height: 41" (1041 mm)
|
|
|
|
| |
|

 Click To Enlarge Photo |
Delta 36-830LA 10'' Unisawฎ 3 HP, Single Phase, Left Tilt |
|
For a Limited Time Get
Free Ground Shipping
Delta Model 36-830LA, Left Tilt, contains a 3 HP, 230V, 60 Hz.,
3450 rpm single phase motor with push-button station magnetic starter,
TEFC motor enclosure, equipment mounting hooks, see-through blade
guard, 10" diameter combination blade, miter gauge, table insert, set
of three matching V-belts, dust port for 4" collection hose, 30" DELTAฎ
UNIFENCEฎ with extension legs, MDF extension table and instruction
manual.
The Delta Difference
Widely-spaced, massive trunnions support the husky saw carriage.
Machined from fine-grained cast-iron, easy alignment for superior accuracy.
Precision-ground, stress-proof arbor is flanged-faced after assembly for
accuracy.
T-slot cast-iron table on either side of saw blade hold Auto-Set miter
gage securely, even beyond front of table.
Positive traction, three belt V-drive operates between two massive,
lifetime ball bearings to eliminate vibration and assures smooth operation
while making use of all power from the motor.
Flip stop for repeatable cuts.
Low profile fence for cutting double sided laminates.
Includes sliding fence face for more material support.
4" dust port for optimal dust management.
Additional Specifications:
Motor
3 HP, 230V, 60 Hz
Type of Motor
Induction
Key Feature
Triple V-Belt
Diameter of Arbor
5/8"
Diameter of Blade
10"
Capacities
Max Depth of Cut: 3 1/8"
Max Rip to Right of Blade: 30"
Max Rip to Left of Blade: 12"
Max Thickness of Cut at 45 Degrees: 2 1/8"
Distance; Front of Table to Center of Blade: 16 13/16"
Table in Front of Saw Blade at Max Depth of Cut: 12 1/4"
Max Width of Dado: 13/16"
Table
Height: 34"
Width w/Extension Wing and Table Board: 62"
T-Slot Miter Gage Groove: 3/8" x 3/4"
Overall Dimensions
Height: 36 3/4"
Width with Wings: 30"
Width with Wings and Fence: 64"
Depth: 35 3/4"
Depth with Fence: 43"
|
|
|
|
| |
|
|
|