 |
Max's Dremel Search: Matches Found (177)(Viewing 0 - 15) |
 |
|
  Click To
Enlarge Photo |
Dremel 1/4-Inch Point High Speed Cutter |
|
A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals.
The 100 Features:
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on curved surfaces.
Specifications:
User Tips:
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
Includes:
- Dremel 100 1/4-Inch Point High Speed Cutter
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 1/32'' Engraving Cutter |
|
This provides plenty of shank for the collet or chuck to hold onto. Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
The 105 Features:
- High-speed cutter designed for precision engraving
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals
- 3/32'' shank
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 3/32'' shank Engraving Cutter (5 Pack) |
|
Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
The 106 Features:
- High-speed cutter designed for precision engraving
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
- 3/32'' shank
Specifications:
- Bit Diameter Inch 1/16''
- Bit Diameter mm 1,6 mm
- Color Code Teal
- Description Engraving Cutter
- Shank Diameter 3/32'', 2,4 mm
User Tips
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 3/32'' Engraving Cutter |
|
The 107 Features:
- Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals 3/32'' shank
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 1/32'' Engraving Cutter |
|
The 108 Features:
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
Specifications:
- Model No.: 108
- Bit Diameter: 1/32" (0.8 mm)
- Color Code: Teal
- Shank Diameter: 3/32" (2.4 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 1/16'' Engraving Cutter |
|
Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
The 109 Features:
- High-speed cutter designed for precision engraving
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Specifications:
- Bit Diameter (inch): 1/16''
- Bit Diameter (mm): 1,6 mm
- Color Code: Teal
- Description: Engraving Cutter
- Shank Diameter: 3/32'', 2,4 mm
User Tips
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 5/64'' Engraving Cutter |
|
Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
The 115 Features:
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
User Tips:
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 1/32'' Engraving Cutter |
|
The DR111 Features:
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
Specifications:
- Bit Diameter: 1/32" (0.8 mm)
- Color Code: Teal
- Shank Diameter: 3/32" (2.4 mm)
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 3/64'' Engraving Cutter |
|
The 112 Features:
- High-speed cutter designed for precision engraving
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals
- 3/32'' shank
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 1/16'' Engraving Cutter |
|
Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.
The 113 Features:
- High-speed cutter designed for precision engraving
- Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
- 3/32'' shank
Specifications:
- Bit Diameter (inch): 1/16''
- Bit Diameter (mm): 1,6 mm
- Color Code: Teal
- Description: Engraving Cutter
- Shank Diameter: 3/32'', 2,4 mm
User Tips
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5/16'' High-Speed Cutter |
|
The 114 Features:
- High-quality, versatile cutter made from high-grade steel
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods
- 1/8'' shank
Specifications:
- Part Number: 114
- Bit Diameter Inch: 5/16''
- Item Description: High Speed Cutter
- Color Code: Teal
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 5/16'' High-Speed Cutter |
|
A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals.
The 115 Features:
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on curved surfaces.
User Tips:
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 1/8'' Shank 1/4'' Point High-Speed Cutter |
|
The Dremel 116 High-Speed Cutter is a high-quality, versatile cutter made from high-grade steel. Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on flat and slotted surfaces.
The 116 Features:
- A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on curved surfaces.
Specifications:
- Bit Diameter Inch 1/4''
- Bit Diameter mm 6,4 mm
- Color Code Teal
- Description High Speed Cutter
- Shank Diameter 1/8?, 3,2 mm
User Tips:
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 5 - Piece 1/4'' High-Speed Cutter |
|
A versatile, high-quality cutter made of high-grade steel for use on wood, plastic and soft metals.
The 117 Features:
- High-quality, versatile cutter made from high-grade steel
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods especially on curved surfaces.
- 1/8'' shank
Specifications:
- Bit Diameter (inch): 1/4''
- Bit Diameter (mm): 6,4 mm
- Color Code: Teal
- Description: High Speed Cutter
- Shank Diameter: 1/8'', 3,2 mm
User Tips
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 1/8'' High-Speed Steel Cutter |
|
The 118 Features:
- High-quality, versatile cutter made from high-grade steel
- Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods
- 1/8'' shank
|
|
|
|
| |
|
|
Next
Tools
