|
|
 |
 |
Max's Dremel Search: Matches Found (10)(Viewing 0 - 5) |
 |
|
  Click To
Enlarge Photo |
Dremel 1.15 Amp 35,000 RPM Single Speed Rotary Tool Kit w/ 7 Accessories |
|
The Dremel 100 Series rotary tool offers single speed convenience for full-speed applications like routing, cutting, drilling and sanding applications. Its single speed setting is perfect for all-the-time high speed use.
The 100-N/7 Features:
- Ideal for sanding, carving and drilling and when one speed is all you need
- Single speed control for fulltime 35,000 rpm operation
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort during prolonged use
Specifications:
- Amperage 1.15
- Cord Length 6'
- Speed 35,000 rpm
- Voltage 120 AC, 50-60 Hz
- Warranty 2 years
- Weight (lbs.) 18 oz.
Includes:
- Dremel 100 Series Single Speed Rotary Tool
- 402 Mandrel
- 407 Coarse 1/2" Sanding Drum
- 415 Dressing Stone
- 420 Heavy Duty Emery Cut-Off Wheel
- 432 1/2" 120 Grit Sanding Band
- 932 Aluminum Oxide Grinding Stone
- 84922 Silicon Carbide Grinding Stone
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 200 Series 15,000 to 35,000 Two Speed Rotary Tool Kit w/ 15 Accessories |
|
The Dremel 200 Series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutting and sanding applications.
The 200-1/15 Features:
- Two speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Click-and-set on/off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort
Specifications:
- Amperage 1.15 Amps
- Cord Length 6 ft.
- Speed 15,000 or 35,000 rpm
- Voltage 120 AC, 50-60 Hz
- Warranty 3 Years
Includes:
- Dremel 200 Series Rotary Tool
- Lawn Mower and Garden Tool Sharpener
- 194 High Speed Cutter
- 401 Mandrel
- 402 Mandrel
- 407 Coarse 1/2" Sanding Drum
- 408 Coarse 1/2" Sanding Band
- 420 Heavy Duty Emery Cut-Off Wheel
- 421 Polishing Compound
- 422 Cone Polishing Tip
- 425 Emery Wheel
- 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel
- 429 Large Felt Wheel
- 432 1/2" 120 Grit Sanding Band
- 932 Aluminum Oxide Grinding Stone
- 8193 Aluminum Oxide Grinding Stone
- 83322 Silicon Carbide Grinding Stone
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 200 Series 15,000 to 35,000 Two Speed Rotary Tool Kit w/ 21 Accessories |
|
The Dremel 200 Series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutting and sanding applications.
The 200-1/21 Features:
- Two speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Click-and-set on/off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort
Specifications:
- Amperage: 1.15 Amps
- Cord Length: 6 ft.
- Speed: 15,000 or 35,000 rpm
- Voltage: 120 AC, 50-60 Hz
- Warranty: 3 Years
Includes:
- Dremel 200 Series Rotary Tool
- Multipurpose Cutting Guide attachment
- 194 High Speed Cutter
- 401 Mandrel
- 402 Mandrel
- 407 Coarse 1/2" Sanding Drum
- 414 Small Felt Wheel (2)
- 415 Dressing Stone
- 420 Heavy Duty Emery Cut-Off Wheel
- 421 Polishing Compound
- 425 Emery Wheel (2)
- 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel
- 429 1" Felt Polishing Wheel (2)
- 432 1/2" 120 Grit Sanding Band
- 445 1/2" 240 Grit Sanding Band
- 561 MultiPurpose Cutting Bit
- 932 Aluminum Oxide Grinding Stone
- 8193 Aluminum Oxide Grinding Stone
- 84922 Silicon Carbide Grinding Stone
- 83142 Silicon Carbide Grinding Stone
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 300 Series 1.5 Amp Variable Speed Rotary Tool w/ 50 Accessories |
|
Dremel’s redesign for the 300 series is sleek, beautifully balanced and even more comfortable than before, with all the capabilities and possibilities Dremel’s famous for.
We like the new, curvier grip and how good it feels: light, comfortable, with virtually no vibration even after a good half an hour. Its five speed sets range from 5,000 to a router-like 35,000 rpm, and combined with a seemingly endless array of bits and attachments, you can carve, grind, polish, trim, sand, cut a wide range of material, shape, clean, remove grout, smooth, drill, rout, sculpt, sharpen, engrave, strip finishes, limited only by your own imagination.
The secret ingredient is the speed. With a bit moving at 35,000 rpm, you don’t need to lean into the job at all; on the contrary, we found a light touch to be the most effective, and the tool does the work for you. Control is superb, thanks to a comfortable housing and excellent balance whether you’re doing detail work with a pencil-like grip or grasping the tool like a tennis racquet. It’s light as a feather at just about a pound, so even working at shoulder height or above is no chore. We like the dovetail slot on the end and the array of accessories it accepts, like the Flex light, for spot-intensive illumination. Bit change is fast and easy; the collet locks with an easy-on-your-finger button, and the wrench stores on board. This set comes with a 50-piece accessory kit, but we guarantee that once you see what this tool can do, you’ll be hooked, and you’ll want to check out every accessory available. Dremel also includes the circle cutter gadget in this kit, and it really does a great job on a variety of stock.
As time goes on, you’ll want to pick up the flex shaft and right-angle attachments for cramped quarters, add on a router-type base, and maybe even get the stand that turns the tool into a mini drill press. If you’ve never had a rotary tool, you absolutely can’t go wrong with this one, and if you’re upgrading from a single- or dual-speed model, you’ll love it.
The DR300-1/50 Features:
- New, dynamic design for additional comfort and control
- Variable speed from 5,000 to 35,000 rpm; click-and-set on/off switch
- Lightweight design for comfort during prolonged use. Comfort grip housing for easier handling and better tool control
- Dove-tail feature for Dremel-exclusive attachments; includes 50 attachments
- 5-year warranty
Specifications:
- Operates with variable speed from 5,000 to 35,000 RPM
- 1.15 Amps
- 6' Power cord
Includes:
- 300 Series Variable Speed Rotary Tool
- Circle Cutter
- 105 Engraving Cutter
- 108 Engraving Cutter
- 191 High Speed Cutter
- 194 High Speed Cutter
- 401 Mandrel
- 402 Mandrel
- 403 Brush Wheel
- 407 Coarse 1/2 in. Sanding Drum
- 408 Coarse 1/2 in. Sanding Band (3)
- 412 Medium Sanding Disc (10)
- 414 Small Felt Wheel (5)
- 420 Heavy Duty Emery Cut-off Wheel (2)
- 421 Small Polishing Compound
- 426 1 1/4 in. Fiberglass Cut-off Wheel (2)
- 429 Large Felt Wheel (2)
- 430 Coarse 1/4 in. Sanding Drum
- 431 Coarse 1/4 in. Sanding Band (3)
- 432 Fine 1/2 in. Sanding Band (3)
- 438 Fine 1/4 in. Sanding Band (3)
- 481 3/32 in. Collet
- 511 Coarse Buffing Wheel
- 512 Fine Buffing Wheel
- 561 Multi-Purpose Bit
- 7122 Diamond Point Cutter
- 8175 Aluminum Oxide Grinding Stone
- 83322 Aluminum Oxide Grinding Stone
- Case
|
|
|
|
| |
|
Click To
Enlarge Photo |
Dremel 300 Series 5,000 to 35,000 RPM Variable-Speed Tool Kit w/ 2 Attachments & 28 Accessories |
|
The Dremel 300 Series rotary tool offers the precision and control required to complete a wide range of projects--from fine art to home repair. Its variable speed control allows you to set the speed of the tool to match a particular accessory or the task at hand.
The 300-2/28 Features:
- Variable speed from 5,000 to 35,000 rpm
- Lightweight design for comfort during prolonged use
- Comfort grip housing for easier handling and better tool control
- "Dove-tail" feature for Dremel-exclusive attachments
- On board tool storage keeps your wrench close at hand
- Click-and-set on/off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
Specifications:
- Amperage 1.15 Amps
- Cord Length 6 ft.
- Speed Variable (5,000 to 35,000 RPM)
- Voltage 120 AC, 50-60 Hz
- Warranty 4 years
Includes:
- 300 Series Variable Speed Rotary Tool
- Lawn Mower and Garden Tool Sharpener
- Multipurpose Cutting Guide attachment
- 105 Engraving Cutter
- 107 3/32" Engraving Cutter
- 150 1/8" Drill bit
- 191 High Speed Cutter
- 194 High Speed Cutter
- 401 Mandrel (2)
- 402 Mandrel
- 403 Bristle Brush
- 405 Bristle Brush
- 407 Coarse 1/2" Sanding Drum
- 408 Coarse 1/2" Sanding Band
- 414 Felt Wheel
- 421 Polishing Compound
- 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel
- 428 Carbon Steel Brush
- 429 Felt Wheel
- 432 1/2" 120 Grit Sanding Band
- 445 1/2" 240 Grit Sanding Band
- 481 3/32" Collet
- 511 Coarse Buffing Wheel
- 540 1-1/4" Cut-Off Wheel
- 560 Drywall Cutting Bit
- 561 Multi-Purpose Cutting Bit
- 932 Aluminum Oxide Grinding Stone
- 952 Aluminum Oxide Grinding Stone
- 7144 Diamond Wheel Point
- 84922 Silicon Carbide Grinding Stone
|
|
|
|
| |
|
|
|
|
Next
Tools
