|
  Click To
Enlarge Photo |
Airluxe Pneumatic Coil Roofing Air Nailer - 31357L |
|
The 31357L Features:
• Rugged cast aluminum construction.
• Shoots 7/8" to 1-3/4" long nails.
• 120 nail capacity high impact magazine feed.
• Sequential trip trigger.
• 75-110 PSI
• 1/4" Inlet.
Includes:
• Flat nose and shingle bracket for proper shingle spacing
• 120 nails
• Goggles
• Oil
• Hex key
• Wrenches
• Manual
|
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable CFBN125A Brad Nailer and Compressor Combo Kit |
|
The CFBN125A Features:
• 18 GA. BRAD NAILER
• Uses standard 18 Ga. Brad nails from 5/8" to 1 1/4"
• Tool-free quick-release nose piece
• Hardened driver blade
• Tool-free depth-of-drive adjustment
• Durable, side-load magazine
• Muffled, adjustable exhaust port
•
• 6 GAL. PANCAKE COMPRESSOR
• 10 Amp, 120 VAC
• Oil-free design for less maintenance
• Ability to run on standard household current
• 3.7 SCFM @ 40 PSI - 2.6 SCFM @ 90 PSI
• Standard Equipment: Nailer #BN125A, compressor, 25' air
hose (300 PSI) with ferrules on both ends, 1/4" male and
female quick couplers, pipe joint tape, 1000 brad nails, oil,
carrying case and operating manuals |
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable CFBN200A Brad Nailer and Compressor Combo Kit |
|
The CFBN200A Features:
• 18 GA. BRAD NAILER
• Uses standard 18 Ga. brad nails from 3/4" to 2"
• Tool-free jam release mechanism
• Hardened driver blade
• Tool-free depth-of-drive adjustment
• Durable, side-load magazine
• Muffled, adjustable exhaust port
•
• 6 GAL. PANCAKE COMPRESSOR
• 10 Amp, 120 VAC
• Oil-free design for less maintenance
• Ability to run on standard household current
• 3.7 SCFM @ 40 PSI - 2.6 SCFM @ 90 PSI
• Standard Equipment: Nailer #BN200A, compressor, 25' air
hose (300 PSI) with ferrules on both ends, 1/4" male and
female quick couplers, pipe joint tape, 1000 brad nails, oil,
carrying case and operating manuals |
|
|
|
| |
|
Click To
Enlarge Photo |
Porter-Cable CFFC350C Clipped-Head Framing Nailer and Compressor Combo Kit |
|
The CFFC350C Features:
• FRAMING NAILER
• Use standard 30-34-degree, 2" to 3 1/2" x .113" to .131"
paper collated clipped head framing nails
• Selectable trigger - restrictive or contact actuation mode
• Power to drive nails (up to 3 1/2" c .131") into engineered lumber
• AIR COMPRESSOR
• Delivers 135 PSI
• High air output - 8.0 SCFM @ 40 PSI and 5.3 SCFM @ 90 PSI
• Standard Equipment: Nailer FC350A (with carrying case),
pancake air compressor, 3/8" x 50' air hose, 1/4" fittings
(plug & coupler), thread seal tape and operating manual. |
|
|
|
| |
|
